DTC P2123 THROTTLE/PEDAL POSITION SENSOR/SWITCH “D” CIRCUIT HIGH INPUT
|
DTC P2123 THROTTLE/PEDAL POSITION
SENSOR/SWITCH “D” CIRCUIT HIGH INPUT
|
Detect the open or short circuit of accelerator
pedal position sensor 1.
Judge NG when out of the standard value.
(1)
|
Engine
control module (ECM)
|
(3)
|
Accelerator pedal position sensor 2 signal.
|
|
|
(2)
|
Accelerator pedal position sensor 1 signal.
|
|
|
|
|
(4)
|
Accelerator
pedal position sensor
|
|
|
Secondary
Parameters
|
Enable
Conditions
|
Ignition
switch
|
ON
|
Always perform the diagnosis continuously.
Judge OK and clear the NG when the malfunction
criteria below are completed.
Judgment
Value
Malfunction
Criteria
|
Threshold
Value
|
Sensor
1 input voltage
|
≤ 4.865
V
|
Time Needed for Diagnosis:
80
milliseconds
Malfunction Indicator
Light Illumination:
Illuminates as soon as malfunction occurs.
•
|
When the OK idling cycle was completed 40 times
in a row
|
•
|
When “Clear Memory” was
performed (Only engine stop)
|
MALFUNCTION
INDICATOR LIGHT CLEAR CONDITION
|
•
|
When the OK driving cycle was completed 3 times
in a row
|
•
|
When “Clear Memory” was
performed (Only engine stop)
|
•
|
Single malfunction: Control with normal sensor
|
•
|
Multi malfunction: Fix the throttle
opening angle to 6°.
|
ECM OPERATION
AT DTC SETTING
|
Memorize the freeze frame data. (For test
mode $02)