PRE-RELEASE
INSTALLATION
| INSTALLATION |
Apply a coat of spray type lubricant to the mating area of cushion rubbers in advance.
Install the rear exhaust pipe bracket to cushion rubber.
| Note | ||
|
Replace the gaskets and self-locking nuts with new ones. |
Tightening torque:
48 Nm (4.9 kgf-m, 35.4 ft-lb)
Install the rear exhaust pipe to center exhaust pipe.
Tightening torque:
18 Nm (1.8 kgf-m, 13.0 ft-lb)
