PRE-RELEASE
INSPECTION
| INSPECTION |
| WITHOUT USING BELT TENSION GAUGE |
Replace the belts, if cracks, fraying or wear is found.
Check the drive belt tension and adjust it if necessary by changing generator installing position and/or idler pulley installing position.
Belt tension:
(A)
replaced: 7 — 9 mm (0.276 — 0.354 in)
reused: 9 — 11 mm (0.354 — 0.433 in)
(B)*
replaced: 7.5 — 8.5 mm (0.295 — 0.335 in)
reused: 9.0 — 10.0 mm (0.354 — 0.394 in)
*: with air conditioner
|
(A)
|
Front side
belt
|
|
(B)
|
Rear side
belt
|
|
C/P
|
Crank pulley
|
|
GEN
|
Generator
|
|
P/S
|
Power steering
oil pump pulley
|
|
A/C
|
Air conditioning
compressor pulley
|
|
I/P
|
Idler pulley
|
| WITH USING BELT TENSION GAUGE |
Replace the belts, if cracks, fraying or wear is found.
Check the belt tension using belt tension gauge. And adjust it if necessary by changing the generator installing position and/or idler pulley installing position.
Belt tension:
(A) 490 — 640 N (50 — 65 kgf, 110 — 144 lb)
(B) 350 — 450 N (36 — 46 kgf, 79 — 101 lb)
|
(A)
|
Front side
belt
|
|
(B)
|
Rear side
belt
|
|
C/P
|
Crank pulley
|
|
GEN
|
Generator
|
|
P/S
|
Power steering
oil pump pulley
|
|
A/C
|
A/C
compressor pulley
|
|
I/P
|
Idler pulley
|
