PRE-RELEASE
INSPECTION
| INSPECTION |
Replace the belts, if cracks, fraying or wear is found.
Remove the V-belt cover and reservoir tank. (with belt tension gauge)
Check the V-belt tension and adjust it if necessary by changing the generator installing position or idler pulley installing position.
(A)
When installing new parts:
618 — 755 N (63 — 77 kgf, 139 — 170 lb)At inspection:
490 — 640 N (50.0 — 65.3 kgf, 110.2 — 143.9 lb)(B)
When installing new parts:
740 — 880 N (75.5 — 89.7 kgf, 166 — 198 lb)At inspection:
350 — 450 N (35.7 — 45.9 kgf, 78.7 — 101.2 lb)
|
(A)
|
Front side
belt
|
|
(B)
|
Rear side
belt
|
|
C/P
|
Crank pulley
|
|
GEN
|
Generator
|
|
P/S
|
Power steering
oil pump pulley
|
|
A/C
|
Air conditioning
compressor pulley
|
|
I/P
|
Idler pulley
|
(A)
When installing new parts:
7 — 9 mm (0.276 — 0.354 in)At inspection:
9 — 11 mm (0.354 — 0.433 in)(B)
When installing new parts:
7.5 — 8.5 mm (0.295 — 0.335 in)At inspection:
9.0 — 10.0 mm (0.354 — 0.394 in)
|
(A)
|
Front side
belt
|
|
(B)
|
Rear side
belt
|
|
C/P
|
Crank pulley
|
|
GEN
|
Generator
|
|
P/S
|
Power steering
oil pump pulley
|
|
A/C
|
Air conditioning
compressor pulley
|
|
I/P
|
Idler pulley
|
