INSTALLATION

INSTALLATION

Install the joint to the transmission and secure with the spring pin.

Insert gear shift lever from room side.

Note
After inserting rod and stay, temporarily put them onto transmission mount.

Lift-up the vehicle.

Mount the cushion rubber on body.

Tightening torque:

18 Nm (1.8 kgf-m, 13.0 ft-lb)

(A)	Stay
(B)	Cushion rubber

Connect the rod to the joint.

Tightening torque:

18 Nm (1.8 kgf-m, 13.0 ft-lb)

(A)	Stay
(B)	Rod

Connect the stay to transmission bracket.

Tightening torque:

18 Nm (1.8 kgf-m, 13.0 ft-lb)

(A)	Stay
(B)	Transmission bracket

Install the heat shield cover. (If equipped)

Install the rear exhaust pipe and muffler.

•

Saab 9-2X 2.5i Linear

•

Saab 9-2X 2.0T Aero

Install the plate assembly to body.

Tightening torque:

7.5 Nm (0.76 kgf-m, 5.5 ft-lb)

Install console box.