PRE-RELEASE
ADJUSTMENT
| ADJUSTMENT |
Set the select lever to “N” range.
Remove the rear exhaust pipe and muffler.
| • |
Saab
9-2X 2.5i Linear
|
|
| • |
Saab 9-2X 2.0T Aero
|
|
Remove the heat shield cover. (If equipped)
|
(A)
|
Adjusting
nut A
|
|
(B)
|
Adjusting
nut B
|
Turn the adjusting nut B until it lightly touches the connector.
|
(A)
|
Front side
|
|
(B)
|
Select
lever
|
|
(C)
|
Connector
|
|
(D)
|
Adjusting
nut B
|
|
(E)
|
Contact
point
|
|
(F)
|
Adjusting
nut A
|
While preventing the adjusting nut B from moving with a wrench, tighten the adjusting nut A.
Tightening torque:
7.5 Nm (0.76 kgf-m, 5.5 ft-lb)
|
(A)
|
Adjusting
nut A
|
|
(B)
|
Adjusting
nut B
|
After completion of fitting, make sure that the select lever operates smoothly all across the operating range.
Install in the reverse order of removal.
