SAAB WIS ONLINE

CHECK CRUISE SET INDICATOR LIGHT

CHECK CRUISE SET INDICATOR LIGHT

TROUBLE SYMPTOM:

Cruise control can be set, but cruise set indicator light does not illuminate.

WIRING DIAGRAM:


CHECK CRUISE SET INDICATOR LIGHT CIRCUIT.

Turn the ignition switch to OFF.

Disconnect the combination meter harness connector.

Measure the voltage between harness connector terminal and chassis ground.

Connector & terminal

(i11) No. 7 (+) — Chassis ground (−):

Is the voltage more than 10 V?

Yes


No

• Check the fuse No. 5 (in fuse & relay box).

• Check the harness for open or short between combination meter and fuse & relay box.


CHECK CRUISE SET INDICATOR LIGHT CIRCUIT.

Turn the ignition switch to OFF.

Disconnect the ECM harness connector.

Measure the resistance between ECM harness connector terminal and combination meter harness connector terminal.

Connector & terminal

(i10) No. 21 — (B134) No. 16:

Is the resistance less than 10 Ω?

Yes


No

Repair the harness.


CHECK CRUISE SET INDICATOR LIGHT CIRCUIT.

Ground the ECM harness connector terminal with a suitable wire.

Connector & terminal

(B134) No. 16 — Chassis ground:

Does the cruise set indicator light illuminate?

Yes

Check the poor contact of ECM connector.


No

Replace the meter main assembly.