INSPECTION
| INSPECTION |
Measure the resistance between antenna terminal and each antenna wire.
If an antenna wire is OK, resistance will be less than 1 Ω. If an antenna wire is broken, the resistance will be more than 1 MΩ .
| Note | ||
|
When checking the continuity, wind a piece of aluminum foil around the tip of tester probe, and then press the aluminum foil against wire with your finger. |
|
(A)
|
Tester
probe
|
|
(B)
|
Aluminum
foil
|
|
(C)
|
Antenna
wire
|
To locate the broken point, move the probe along antenna wire.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
