INSTALLATION

INSTALLATION

RH SIDE

Install in the reverse order of removal.

Tightening torque:

21 Nm (2.1 kgf-m, 15.2 ft-lb)

Note
The above torque should be only applied to new spark plugs without oil on their threads.
In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing.

LH SIDE

Install in the reverse order of removal.

Tightening torque:

21 Nm (2.1 kgf-m, 15.2 ft-lb)

Note
The above torque should be only applied to new spark plugs without oil on their threads.
In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing.