INSPECTION
| INSPECTION |
| HEADLIGHT BEAM LEVELER ACTUATOR |
Turn on the headlights.
Confirm the headlight beam level is lowered by changing the switch position to 0 - 1 - 2 - 3.
| HEADLIGHT BEAM LEVELER SWITCH |
Connect the battery, headlight beam leveler switch connector and circuit tester as shown in the figure. Measure the voltage at each switch position.
|
(1)
|
470 Ω
|
|
Switch
position
|
Standard (mA)
|
|
0
|
25.5
|
|
1
|
20.3
|
|
2
|
9.8
|
|
3
|
3.5
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
