CAUTION
| CAUTION |
| • |
Supplemental Restraint System “Airbag”
|
|
The airbag system wiring harness is routed near the TCM.
| Important | ||
| • |
All airbag system wiring harness
and connectors are colored yellow. Do not use an electrical test
equipment on these circuit.
|
|
| • |
Be careful not to damage the airbag system wiring harness
when performing diagnostics and servicing the TCM.
|
|
| • |
Measurement
|
|
When measuring the voltage and resistance of ECM, TCM or each sensor, use a tapered pin with diameter of less than 0.64 mm (0.025 in) in order to avoid poor contact. Do not insert the pin more than 0.65 mm (0.026 in).
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
