SAAB WIS ONLINE

PREPARATION TOOL

PREPARATION TOOL

SPECIAL TOOL

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS

32005111

OIL PRESSURE GAUGE ASSY

Used for measuring oil pressure.


32005117

OIL PRESSURE GAUGE ADAPTER

Used oil pump housing when measuring reverse clutch pressure and line pressure.


32005118

OIL PRESSURE ADAPTER SET

Used for measuring transfer clutch pressure.


32005109

OIL FILTER WRENCH

Used for removing and installing ATF filter.


32005099

STOPPER SET

Used for removing and installing automatic transmission assembly to engine.


32005085

ENGINE SUPPORT ASSY

Used for supporting engine.


32005071

PULLER ASSY


• Used for removing extension case roller bearing.

• Used for removing extension oil seal.

• Used for removing front differential side retainer bearing outer race.

• Used for removing front differential side retainer bearing outer ball race.



32005087

INSTALLER

Used for installing extension oil seal.


32005088

REMOVER

Used for removing differential taper roller bearing.


32005127

INSTALLER


• Used for installing transfer outer snap ring.

• Used with SNAP RING OUTER GUIDE (32005128).



32005128

SNAP RING OUTER GUIDE


• Used for installing transfer outer snap ring.

• Used with INSTALLER (32005127).



32005023

WRENCH ASSY

Used for removing and installing differential side retainer.


32005058

DRIFT


• Used for installing converter case oil seal.

• Used for installing taper roller bearing of front differential.



32005075

COMPRESSOR

Used for removing and installing clutch spring.


32005096

PLATE

Used for measuring backlash of hypoid gear.


32005082

PLIERS

Used for removing and installing clutch spring.


32005094

MAGNET BASE


• Used for measuring gear backlash.

• Used with DIAL GAUGE (32005095).



32005095

DIAL GAUGE


• Used for measuring gear backlash.

• Used with MAGNET BASE (32005094).



32005108

REPLACER

Used for removing front roller bearing.


32005072

SEAT

Used for removing spring of transfer clutch piston.


32005129

STOPPER PIN

Used for installing inhibitor switch.


32005154

WRENCH

Used for removing and installing drive pinion lock nut.


32005153

ADAPTER

Used for removing and installing drive pinion lock nut.


32005073

GAUGE

Used for measuring total end play, extension end play and drive pinion height.


32005112

SEAT

Used for holding low clutch piston retainer spring when installing snap ring.


32005133

GAUGE


• Used for measuring the transmission case mating surface to the reduction gear end surface.

• For MPT model.



32005076

GAUGE


• Use for measuring contact face between multi-plate clutch end and transmission.

• For VTD model.



32005144

PULLER

Used for removing reduction driven gear assembly.


32005145

PULLER SET

Used for removing reduction drive gear assembly.


32005091

REMOVER

Used for removing ball bearing.


32005120

HOLDER

Used for removing and installing drive pinion lock nut.


32005113

COMPRESSOR

Used for installing 2-4 brake snap ring.


32005102

HIGH CLUTCH PISTON GUIDE

Used for installing high clutch piston.


32005103

LOW CLUTCH PISTON GUIDE

Used for installing low clutch piston.


32005175

INSTALLER

Used for press-fitting the ball bearing for transfer clutch.


32005024

DIFFERENTIAL SIDE OIL SEAL INSTALLER

Used for installing differential side retainer oil seal.


32005040

OIL SEAL PROTECTOR

Used for installing front drive shaft.


32005065

INSTALLER

Used for installing needle bearing.


32005174

PULLER SET

Used for bolt only.


• Used with PULLER SET (32005145).

• Used with PULLER (32005144).

1. Puller

2. Cap



32005074

PLIERS

Used for removing and installing snap ring.


32005163

CRANK PULLEY WRENCH

Used for stopping rotation of crank pulley when loosening and tightening crank pulley bolts. (Saab 9-2X 2.5i Linear)


32005164

CRANK PULLEY WRENCH

Used for stopping rotation of crank pulley when loosening and tightening crank pulley bolt. (Saab 9-2X 2.0T Aero)


32005026

Vehicle Diagnostic Interface

Troubleshooting for electrical systems.



GENERAL TOOL

TOOL NAME

REMARKS

Depth gauge

Used for measuring transmission end play.

Thickness gauge

Used for measuring clearances of clutch, brake and oil pump.

Micro meter

Used for measuring thickness of drive pinion.

Spring balance

Used for measuring starting torque of drive pinion.

Circuit tester

Used for measuring resistance and voltage.

TORX ® T70

Used for removing and installing differential gear oil drain plug.

Push/pull gauge

Used for measuring low & reverse and high clutch piston stroke.