SAAB WIS ONLINE

ASSEMBLY

ASSEMBLY

OIL PUMP COVER

Install oil pump rotor assembly to oil pump housing.


(A)

Inner rotor

(B)

Outer rotor



Align both pivots with the pivot holes of the cover, and install the oil pump cover being careful not to apply undue force to the pivots.

Tightening torque:

25 Nm (2.5 kgf-m, 18.1 ft-lb)


(A)

Oil pump cover

(B)

Oil pump housing



After assembling, turn the oil pump shaft to check for smooth rotation of the rotor.

Install the oil seal retainer and new seal rings. After adjusting the drive pinion backlash and tooth contact.


(A)

Seal rings (Black)

(B)

Seal rings (Brown)



OIL SEAL RETAINER

Install two new oil seals to the oil seal retainer in proper position using ST.

ST 499247300 INSTALLER


(A)

Oil seal

(B)

Oil seal retainer



Install a new O-ring to the oil seal retainer using vaseline. Install the seal to oil pump housing bore.


(A)

O-ring



Install the oil seal and secure it using three bolts being careful not to damage oil seal lip.

Tightening torque:

7 Nm (0.7 kgf-m, 5.1 ft-lb)


(A)

Oil seal retainer

(B)

Drive pinion shaft