CAUTION
CAUTION |
• |
Wear working
clothing, including a cap, protective goggles, and protective shoes
during operation.
|
• |
Remove contamination including dirt and corrosion before
removal, installation or disassembly.
|
• |
Keep the disassembled parts in order and protect them
from dust or dirt.
|
• |
Before removal, installation or disassembly, be sure
to clarify the failure. Avoid unnecessary removal, installation,
disassembly, and replacement.
|
• |
Be careful not to burn yourself, because each part on
the vehicle is hot after running.
|
• |
Use genuine gear oil, grease etc. or the equivalent.
Do not mix gear oil, grease etc. with that of another grade or from
other manufacturers.
|
• |
Be sure to tighten fasteners including bolts and nuts
to the specified torque.
|
• |
Place shop jacks or rigid rack at the specified points.
|
• |
Apply gear oil onto sliding or revolution surfaces before
installation.
|
• |
Before installing O-rings or snap rings, apply sufficient
amount of gear oil to avoid damage and deformation.
|
• |
Before securing a part on a vise, place cushioning material
such as wood blocks, aluminum plate, or shop cloth between the part
and the vise.
|
• |
Avoid damaging the mating face of the case.
|