PRE-RELEASE

DISASSEMBLY

DISASSEMBLY

Using the ST1, support the housing and hub securely.

Attach the ST2 to housing and drive the hub out.

ST1 32005198 HUB REMOVER

ST2 32005200 HUB STAND

If the inner bearing race remains in hub, remove it with a suitable tool (commercially available).

Note
Be careful not to scratch the polished area of hub.

Important
Do not reuse the bearing if the hub was removed.

Remove the disc cover from housing.

Using a standard screwdriver, remove the outer and inner oil seals.

Using a flat tip screwdriver, remove the snap ring.

Note
Be careful not to damage the housing at removal.

Using the ST1, support the housing securely.

Using the ST2, hold the inner race to drive out the outer race of bearing.

ST1 32005206 HOUSING STAND

ST2 32005201 BEARING PULLER

Using the ST and a hydraulic press, drive the hub bolts out.

ST 32005200 HUB STAND