PRE-RELEASE
INSTALLATION
| INSTALLATION |
Insert the sleeve yoke into transmission, and then attach the center bearing to body.
Tightening torque:
52 Nm (5.3 kgf-m, 38.3 ft-lb)
Tightening torque:
31 Nm (3.2 kgf-m, 22.9 ft-lb)
|
(A)
|
Matching
mark
|
Using new bolts, install the differential mount front cover.
Temporarily tighten the bolt (A) while pushing cover forward.
Tighten the bolt (B) to specified torque.
Tighten the bolt (A) to specified torque.
Tighten the remaining bolts to specified torque.
Tightening torque:
90 Nm (9.2 kgf-m, 66 ft-lb)
Install the center exhaust pipes.
Install the rear exhaust pipe and muffler.
