PRE-RELEASE
INSTALLATION
| INSTALLATION |
Install the ABSCM&H/U bracket.
Tightening torque:
33 Nm (3.3 kgf-m, 24 ft-lb)
Install the ABSCM&H/U aligning the groove of damper on ABSCM&H/U side with the pawl of bracket.
| Note | ||
|
Check the identification mark of ABSCM&H/U. |
Tightening torque:
7.5 Nm (0.76 kgf-m, 5.5 ft-lb)
Tightening torque:
15 Nm (1.5 kgf-m, 10.8 ft-lb)
Using the cable clip, secure the ABSCM&H/U harness to bracket.
Connect the connector to ABSCM&H/U.
| Note | ||
| • |
Be sure to remove all foreign matter from inside of
the connector before connecting.
|
|
| • |
Ensure that the ABSCM&H/U connector
is securely locked.
|
|
Connect the ground cable to ABSCM&H/U, and then apply anti-corrosive wax.
Install the air cleaner case and air intake duct.
Bleed air from the brake system.
