PRE-RELEASE
REMOVAL
| REMOVAL |
Disconnect the ground cable from battery.
Remove the air intake duct and air cleaner case from the engine compartment to facilitate removal of ABSCM&H/U.
Use compressed air to get rid of water around the ABSCM&H/U.
| Note | ||
|
Contact will be insufficient if the terminal gets wet. |
Disconnect the ABSCM&H/U connector pulling up the lock lever.
| Important | ||
|
Do not pull the harness when disconnecting connector. |
||
Disconnect the brake pipes from ABSCM&H/U.
Wrap the brake pipe using a vinyl bag not to spill the brake fluid on the vehicle body.
| Important | ||
|
When brake fluid is attached to the vehicle body, wash it off with water and wipe the water. |
||
Remove the nuts and remove the ABSCM&H/U.
| Important | ||
| • |
Do not drop or bump the ABSCM&H/U.
|
|
| • |
Do not turn ABSCM&H/U upside down
or place it sideways for storage.
|
|
| • |
Be careful that no foreign objects are mixed in ABSCM&H/U.
|
|
| • |
Be careful that no water enters inside the connectors.
|
|
Remove the ABSCM&H/U bracket.
