PRE-RELEASE
REMOVAL
| REMOVAL |
Set the vehicle on a lift.
Loosen the wheel nuts.
Lift-up the vehicle, and then remove the wheels.
Pull down and release the parking brake.
Remove the two mounting bolts, and then remove the disc brake assembly.
Remove the disc rotor.
| Note | ||
|
If the disc rotor is difficult to remove try following two methods in order. |
Turn the adjusting screw using a flat tip screwdriver until brake shoe gets away enough from the disc rotor.
|
(1)
|
Adjusting
screw
|
|
(2)
|
Cover
|
|
(3)
|
Flat tip
screwdriver
|
|
(4)
|
Back plate
|
If the disc rotor seizes up within hub, drive the disc rotor out by installing an 8-mm bolt in holes B on rotor.
