PRE-RELEASE
ADJUSTMENT
| ADJUSTMENT |
| SHOE CLEARANCE |
Remove the adjusting hole cover from back plate.
Turn the adjusting screw using a flat tip screwdriver until brake shoe is in close contact with disc rotor.
|
(1)
|
Adjusting
screw
|
|
(2)
|
Adjusting
hole cover (rubber)
|
|
(3)
|
Flat tip
screwdriver
|
|
(4)
|
Back plate
|
Turn back (downward) the adjusting screw 3 or 4 notches.
Install the adjusting hole cover to back plate.
| LEVER STROKE |
Remove the console box lid.
Forcibly pull the parking brake lever 3 to 5 times.
Adjust the parking brake lever by turning adjuster until parking brake lever stroke is set at 7 to 8 notches with operating force of 196 N (20 kgf, 44 lb).
|
(1)
|
Parking
brake lever
|
|
(2)
|
Lock nut
|
|
(3)
|
Adjusting
nut
|
Tighten the lock nut.
Install the console box lid.
Lever stroke:
7 to 8 notches when pulled with a force of 196 N (20 kgf, 44 lb)
Tightening torque (Lock nut):
6 Nm (0.6 kgf-m, 4.4 ft-lb)
