INSPECTION
| INSPECTION |
| Important | ||
|
Before working on the airbag
module, refer to the “CAUTION” in General Description.
|
||
Perform the inspection of following items, and replace the damaged parts with new ones.
With side clash (when side airbag is deployed)
| • |
Side airbag
module assembly
|
|
| • |
Backrest pad assembly
|
|
| • |
Backrest frame assembly
|
|
| • |
Backrest cover assembly
|
|
Other replacement parts, which found to be damaged by visual check
| • |
Headrest
assembly
|
|
| • |
Bush
|
|
| • |
Slide rail OUT
|
|
| • |
Slide rail IN
|
|
| • |
Seat hinge cover
|
|
| • |
Seat lifter lever
|
|
| • |
Reclining lever
|
|
| • |
Side airbag harness and connector (body side)
|
|
With side clash (when side airbag is not deployed)
Check the seat and airbag module visually, and then replace them with new ones if damaged or cracked.
Specially inspect the damage of airbag module body, installing bracket, harness connector.
Without side clash (dirt and damage of cover)
Replace the corresponding part with a new one.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
