INSPECTION
| INSPECTION |
Remove the instrument panel lower cover.
Remove the lower column cover.
Unfasten the hold-down clip which secures harness and disconnect the connector of ignition switch from body harness.
Turn the ignition key plate to each position and check the continuity between terminals of ignition connector.
| Switch position | Terminal No. | Standard |
|
LOCK
|
—
|
—
|
|
ACC
|
No.
1 and No. 2
|
Less
than 1 Ω
|
|
ON
|
No.
1 and No. 2
No. 1 and No. 4 No. 2 and No. 4 |
Less
than 1 Ω
|
|
ST
|
No.
1 and No. 3
No. 1 and No. 4 No. 3 and No. 4 |
Less
than 1 Ω
|
If NG, replace the ignition switch.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
