SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Important

Be careful not to move the sunroof cable when installing sunroof motor.


Check the alignment mark (A) of sunroof motor.


Confirm the alignment mark (A) of sunroof bracket link.


Install the sunroof motor.

After installing the motor, reconfirm the alignment marks of motor side and sunroof bracket link side.

Connect the sunroof motor harness connector and then connect the battery ground cable.

Check the sunroof operation with the procedure as shown in the table.

Checking order Switch position
Completely close sunroof.

Closed

Tilt-up sunroof to most upper position.

Tilt-up

Lower sunroof completely.

Tilt-down

Open sunroof to near the completely open position.

Open

Completely open sunroof.

Open

Close sunroof 150 mm (5.91 in) away from completely closed position.

Closed

Completely close sunroof.

Closed



Install the glass lid and trims in the reverse order of removal.