PRE-RELEASE

30 02 631 Adhesive kit

30 02 631 Adhesive kit

Specifications

Loctite 406-770.

406, 20 g and 770, 10 ml

For gluing greasy plastics.

Saab application

For example, fixation of camshaft cover rubber gasket.

Packaging

1

Transport

The product is classified as dangerous goods when transporting. Special regulations apply to packaging, marking and transport, therefore existing lead times cannot be guaranteed.

Directives

Loctite 406: Contains cyanoacrylate. Warning! Will quickly glue shut eyes and skin. In case product gets into eyes or on the skin, rinse thoroughly with plenty of water and call a physician. Make sure that ventilation is adequate.

Use Loctite dosage equipment in order to avoid contact with eyes and skin.

Loctite 770: This product is highly flammable. Dehydrates the skin. Inhaling can cause headaches and nausea. Avoid contact with the skin. Avoid inhaling vapour. Must be stored separately from materials which may cause the product to ignite - Smoking is prohibited. Make sure that ventilation is adequate. Must not be poured down the drain.

Material safety data sheet

1.	IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product code 0158406 Product name 406 Manufacturer - supplier Loctite Sweden AB Box 8823 SE-402 71 Göteborg Tel: +46 31 7505400 Fax: +46 31 7505391 Tel (emergencies): +353-1-4599301 / +353-87-2629625 / +353-1-4046444

2.

COMPOSITION/INFORMATION ON INGREDIENTS Product type Cyanoacrylate adhesive Ingredient CAS-no. Conc. R-phrases Classification Ethyl cyanoacrylate 7085-85-0 60.00-99.00 R36/37/38 Xi Key FB/FH/FM = Hazard code for fire/health/environment T+ = Very toxic T = Toxic C = Corrosive Xn = Harmful Xi = Irritant V = Moderately harmful IK = Not subject to labelling E = Explosive O = Oxidizing F+ = Extremely flammable F = Highly flammable N = Dangerous for the environment

3.	HAZARDS IDENTIFICATION Irritating to eyes, respiratory system and skin. Bonds skin and eyes in seconds. Highly reactive to water. (See Section 4 on first aid).

4.

FIRST AID MEASURES Inhalation Remove affected person to fresh air. Skin Do not pull bonded skin apart. It may be gently peeled apart using a blunt object preferably after soaking in warm soapy water. Eyes Cover with a warn wet cloth. Cyanoacrylate will bond to eye protein causing lachrymatory effect which will help to debond adhesive. Keep eye covered until debonding is complete, usually within 1-3 days. Do not force eye open. Medical advice should be sought in case solid particles of cyanoacrylate trapped behind the eyelid cause any abrasive damage. Ingestion Ensure that breathing passages are not obstructed. The product will polymerize immediately in the mouth making it almost impossible to swallow. Saliva will slowly separate the solidified product from the mouth (several hours).

5.

FIRE-FIGHTING MEASURES Suitable extinguishing media Non-flammable product (flash point >80 °C). If product is involved in fire extinguish with dry powder, foam or carbon dioxide. Fire/Explosions risks Trace amounts of toxic fumes may be released on incineration. Special protective equipment for firefighters Use respiratory equipment.

6.	SPILLAGE/ACCIDENTAL RELEASE MEASURES Personal precautions Ventilate area. Methods for cleaning up Do not use cloths for mopping up. Polymerize with water and scrape off floor.

7.	HANDLING AND STORAGE Advice for safe handling Provide good ventilation when using large volumes. Odour limit 1-2 ppm. Use of Loctite dispensing equipment is recommended to minimize the risk of skin or eye contact. Storage instructions Store in original container at 2°C to 8°C.

8.

EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational exposure limits. Chemical identity Limit value (SE) Ethyl cyanoacrylate NGV 2ppm 8h TWA. KTV 4ppm (20mg/m) 15 min General, protection Polyethylene or polypropylene gloves and eye protection are recommended when using large volumes. Hand protection Do not use PVC, rubber, nylon or cotton gloves. Eye protection Should be used where there is any risk of splashing.

9.

PHYSICAL AND CHEMICAL PROPERTIES Form/state Liquid Odour Sharp. Characteristic Colour Clear, Colourless Boiling point Boils above 100°C. Solubility in water Insoluble Solubility in acetone Not applicable Density 1.1 kg/m 3 at 20°C Flash Point (PMCC) Exceeds 80°C Vapour pressure Less than 0.5 mm Hg @ 25 °C

10.	STABILITY AND REACTIVITY Polymerisation Polymerisation will occur in the presence of moisture.

11.

TOXICOLOGICAL INFORMATION Inhalation In dry atmosphere (<50% humidity), vapours may irritate the eyes and respiratory system. Repeated or prolonged exposure to high concentrations of vapours may lead to chronic effects in sensitive individuals. Skin Bonds skin and eyes in seconds. Considered to be of low toxicity: acute dermal LD50 (rabbit) >2000mg/kg. Due to polymerisation at the skin surface allergic reaction is not considered possible. Eyes Liquid product will bond eyelids. In a dry atmosphere (RH < 50%) vapours may cause irritation and lachrymatory effect. Ingestion Cyanoacrylates are considered to have relatively low toxicity. Acute oral LD50 is >5000 mg/kg (rat). It is almost impossible to swallow as it rapidly polymerizes in the mouth.

12.	ECOLOGICAL INFORMATION Ecotoxicity Biodegradable product of low ecotoxicity. Other information Does not contain and is not manufactured with any of the substances listed on the Montreal protocol.

13.	DISPOSAL CONSIDERATIONS Disposal considerations Dispose of in accordance with local and national regulations. Polymerize by adding slowly to water (10:1). Dispose of as water insoluble non-toxic solid chemical or incinerate under controlled conditions in accordance with regulations.

14.	TRANSPORT INFORMATION UN-no. None Air (IATA) Not classified Sea (IMO) Not classified Road/Rail (ADR/RID) Not classified

15.

REGULATORY INFORMATION Contains Cyanoacrylate. Warning Bonds skin and eyes in seconds. Keep out of the reach of children. Hazard class Irritant R-phrases R36/37/38 Irritating to eyes, respiratory system and skin. S-phases S23 Do not breathe vapours. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of soap and water.

16.

OTHER INFORMATION The information in this material safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the product(s) described herein. Attention of users is drawn to the possible hazards from improper use of the product(s). Material safety data sheet revised 1999-01-05 For more information Loctite Corporation, International Health and Regulatory Affairs, Tallaght Business Park, Whitestown, Dublin 24, Ireland. Tel: +353-1-4510433 or +353-1-4519466. Fax: +353-1-4510806. Produced by Caitriona Keane Health & Regulatory Affairs - Europe

Material safety data sheet

1.	IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product code 0178213 Product name 770 Manufacturer - supplier Loctite Sweden AB Box 8823 SE-402 71 Göteborg Tel: +46 31 7505400 Fax: +46 31 7505391 Tel (emergencies): +353-1-4599301 / +353-87-2629625 / +353-1-4046444

2.

COMPOSITION/INFORMATION ON INGREDIENTS Product type Solvent-based activator Ingredient CAS-no. Conc. R-phrases Classification N-heptane 142-82-5 60.00 - 100.00 R11, R38, R65, R67, R50/53 F, Xn, N Key FB/FH/FM = Hazard code for fire/health/environment T+ = Very toxic T = Toxic C = Corrosive Xn = Harmful Xi = Irritant V = Moderately harmful IK = Not subject to labelling E = Explosive O = Oxidizing F+ = Extremely flammable F = Highly flammable N = Dangerous for the environment

3.

HAZARDS IDENTIFICATION May cause lung damage if swallowed. Irritating to skin. Vapours may cause drowsiness and dizziness. This product is highly flammable. The flash point is -1°C and explosive limits are approximately 1-7%. The solvent defats the skin and may cause cracking and, in the event of repeated contact, eczema. Vapours may cause head aches and nausea.

4.

FIRST AID MEASURES Inhalation Remove affected person to fresh air, and if still feeling unwell seek medical attention. Skin Wash skin with plenty of soap and water and apply replenishing cream. Eyes Rinse immediately with plenty of water for at least 15 minutes. If irritation persists, seek medical attention. Ingestion Rinse mouth with water then give plenty of water to drink. Do not induce vomiting. Seek medical advice.

5.

FIRE-FIGHTING MEASURES Fire/Explosions risks This product is highly flammable having a flash point of -1°C. Suitable extinguishing media If product is involved in fire extinguish with dry powder, foam or carbon dioxide. Protective equipment Self-contained breathing apparatus should be worn when dealing with fire. General information Keep unaffected containers cool with water spray.

6.	SPILLAGE/ACCIDENTAL RELEASE MEASURES Personal precautions Ventilate area. Eliminate sources of ignition. Methods for cleaning up Confine the spillage with sand, earth or the like, and place in a closed container, which should be partially filled (air space), for disposal.

7.

HANDLING AND STORAGE Advice for safe handling Keep away from sources of ignition - no smoking. Vapours should be extracted to avoid inhalation. Prolonged or repeated skin contact should be avoided. Storage instructions Keep away from sources of ignition. No smoking. Store away from heat in a cool, well-ventilated area.

8.

EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational exposure limits. Chemical identity Limit value (SE) N-heptane NGV 200ppm 8h TWA KTV 300ppm (1200mg/m3) 15 min Skin protection In case of repeated or prolonged skin contact, wear suitable gloves made of PVC, polyethene, natural rubber or similar ester-resistant material.

9.	PHYSICAL AND CHEMICAL PROPERTIES Form/state Liquid Odour Pungent. Colour Almost colourless Boiling point 97 - 99°C. Solubility in water Insoluble Solubility in acetone Miscible Density 0.68 kg/m 3 at 20°C Flash Point (PMCC) -1°C Vapour pressure 35 mm Hg at 20°C Explosion limits 1 - 7%

10.	STABILITY AND REACTIVITY Stability Relatively stable under recommended conditions of storage and handling. Non-reactive with Oxidizing agents, except for peroxides.

11.

TOXICOLOGICAL INFORMATION Inhalation Inhalation of vapours may cause headaches or nausea. Skin Acute dermal LD50 (rabbit) is estimated to be >2000 mg/kg. Solvent may remove essential oils from the skin making it susceptible to attack from other chemicals. Irritating to skin. Eyes May cause irritation to the eyes. Ingestion Small amounts of liquid aspirated into the respiratory system during ingestion or from vomiting may cause bronchopneumonia or pulmonary oedema.

12.	ECOLOGICAL INFORMATION Does not contain any substances listed on the Montreal protocol.

13.	DISPOSAL CONSIDERATIONS Disposal considerations Dispose of in accordance with local and national regulations. Evaporation and incineration recommended.

14.	TRANSPORT INFORMATION UN-no. 1206 Air (IATA) Heptanes, Class 3, Flammable liquid, Packaging Grp II Sea (IMO) Heptanes, Class 3.2, Flammable liquid, Packaging Grp II Road/Rail (ADR/RID) Heptanes, Class 3, Flammable liquids, Item no. 3(b)

15.

REGULATORY INFORMATION Contains N-heptane Hazard class Highly flammable Harmful R-phrases R11 Highly flammable. R38 Irritating to skin. R65 Harmful: may cause lung damage if swallowed. R67 Vapours may cause drowsiness and dizziness. S-phases S9 Keep container in a well-ventilated place. S16 Keep away from sources of ignition - No smoking. S29 Do not empty into drains. S33 Take precautionary measures against static discharges. S62 If swallowed do not induce vomiting: seek medical advice immediately and show this container or label.

16.

OTHER INFORMATION The information in this material safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the product(s) described herein. Attention of users is drawn to the possible hazards from improper use of the product(s). Material safety data sheet revised 1999-11-05 For more information Loctite Corporation, International Health and Regulatory Affairs, Tallaght Business Park, Whitestown, Dublin 24, Ireland. Tel: +353-1-4046444. Fax: +353-1-4510806. Formerly development product LID-1213 Produced by Dr. Sandra Wade Senior HRA Specialist Health & Regulatory Affairs - Europe

PRE-RELEASE

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.