89 96 860 Power steering fluid
|
|
89 96 860 Power steering fluid
|
For Saab. CHF 11S. 1 l bottle.
Used from: Saab 900 M97 chassis nr V2022750, Saab 9000 M97 chassis nr V1014202, Saab 900 Convertible M96 chassis number DT7003151, Saab 9-5.
1
No restrictions apply when transporting this product.
Not mixable with PS 4634, part number 40 - 315 161 224.
|
Material safety data sheet
|
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Trade name
|
PENTOSIN CHF 11S HYDRAULIC FLUID
|
Part no.
|
1405900
|
Manufacturer - supplier
|
Deutsche Pentosin Werke GmbH
Industristrasse 39-43
D-22880 Wedel
GERMANY
Tel: (4103) 91 34-0
Fax: (4103) 91 34-71
|
Source of further information
|
Department FE
|
Information in case of emergency
|
24h emergency number +49 30 19240
|
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Description
|
Mixture of following components and non-hazardous additives:
|
Further references
|
The hazard classifications are given in plain text in section 16.
|
CAS-no.
|
Description
|
Content (%)
|
R-phrases
|
68649-11-6
|
1-Decene, dimer, hydrogenated
|
50-100
|
Xn; R65
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
|
3.
|
HAZARDS IDENTIFICATION
Risk designation
|
Void
|
Special reference regarding hazards for people and the environment
|
The product is not subject to labelling according to evaluation for the final version of the general "EU classification directive for preparations".
|
Classification system
|
Classification corresponds to current EU lists but has been supplemented with information from specialized literature and company data.
|
|
|
4.
|
FIRST AID MEASURES
General information
|
No special procedures necessary.
|
Inhalation
|
Remove to fresh air. In case of discomfort, seek medical advice.
|
Skin
|
In general, the product is not irritating to the skin.
|
Eyes
|
Flush the eyes under running for several minutes. Hold eyes wide open.
|
Ingestion
|
In case discomfort persists, seek medical advice.
|
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Firefighting measures must be suited to the surroundings.
|
Protective equipment
|
No special procedures necessary.
|
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
No measures necessary.
|
Environmental precautions
|
Prevent the product from entering the sewage network/surface water/ground water.
|
Methods for cleaning up
|
Soak up with absorbent material (sand, kieselguhr, acid absorbent, universal absorbent, sawdust).
|
Further references
|
No harmful substances liberated.
|
|
|
7.
|
HANDLING AND STORAGE
Advice for safe handling
|
No special procedures necessary.
|
Storage
|
No special measures required.
|
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Additional information on the design of technical systems
|
No additional information. Refer to section 7.
|
Limits
|
The product does not contain any quantities of materials with critical limits that require warning systems at the workplace.
|
Additional information
|
This sheet is based on the lists that were current during its production.
|
Personal protection equipment
|
General safety and hygiene procedures. Follow standard preventative measures when handling chemicals.
|
Respiratory equipment
|
Not required
|
Hand protection
|
Gloves must be impermeable and resistant to the product/substance/preparation. No recommendations can be provided as to glove material suitable for the product/substance/preparation since no tests have been carried out. Select a glove material with regard to penetration times, permeation coefficients and degradation.
|
Glove material
|
The suitability of gloves is not solely dependent on the material but also other qualitative criteria, and as such varies from manufacturer to manufacturer. Since the product is a preparation consisting of several substances, the durability of the glove material cannot be predicted and must therefore be checked by the user.
|
Penetration time of glove material
|
The exact penetration time can be obtained from the manufacture of protective gloves and must be observed.
|
Eye protection
|
It is recommended to wear eye protection for refilling.
|
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Liquid
|
Odour
|
Characteristic
|
Colour
|
Dark green
|
Vapour pressure (at 20°C)
|
0.001 hPa
|
Melting point
|
-57°C (ISO 3016)
|
Boiling point
|
>280°C (SAE J1703)
|
Flash point
|
>150°C (ISO 2592)
|
Autoignition point
|
235°C (DIN 51794)
|
Spontaneous combustion
|
The product does not spontaneously combust
|
Risk of explosion
|
The product is not explosive
|
Explosion limits
|
0.6-6.5 vol. %
|
Density (at 20°C)
|
>0.827 g/cm
3
(ISO 12185)
|
Solubility in water
|
Insoluble
|
Kinematic viscosity (at 40°C)
|
19 mm
2
/s (ISO 3104)
|
|
|
10.
|
STABILITY AND REACTIVITY
Conditions to avoid
|
No conditions if used as prescribed.
|
Hazardous reactions
|
No known dangerous reactions.
|
Hazardous decomposition products
|
No hazardous decomposition products.
|
|
|
11.
|
TOXICOLOGICAL INFORMATION
Skin
|
Mild irritation (OECD test 404)
|
Eyes
|
Mild irritation (OECD test 405)
|
Sensitization
|
No known sensitization effects.
|
Additional toxicological references:
|
The product is not subject to labelling with regard to the final version of EU general classification guidelines for preparations. From our experience and the information we possess, the product will not cause any harmful effects when handled professionally and used as intended.
|
|
|
12.
|
ECOLOGICAL INFORMATION
General references
|
Water pollution class 2 (self-classification): Risk of water pollution. Do not allow to enter ground water, watercourses or sewers.
|
|
|
13.
|
DISPOSAL CONSIDERATIONS
Recommendation
|
Small quantities can be disposed of with household waste.
|
Waste key numbers
|
Unused product: 541 06 (LAGA - Germany) Designation: Hydraulic oils containing no PCB Disposal instructions: Special incineration
|
European Waste Catalogue
|
13 00 00
OIL WASTES AND WASTES OF LIQUID FUELS (except edible oils, 05, 12 and 19)
13 01 00
Waste hydraulic oils
13 01 11
Synthetic hydraulic oils
|
Contaminated packaging
|
Recommendations: Dispose of in accordance with regulations.
|
|
|
14.
|
TRANSPORT INFORMATION
Sea IMDG/GGVSee
|
Marine pollutant: No
|
Additional information
|
Non-hazardous according to regulations stated above
|
|
|
15.
|
REGULATORY INFORMATION
Labelling according to EU guidelines
|
The substance is not subject to labelling according to EU lists or other sources of literature with which we are acquainted.
|
Water pollution - hazard class
|
WGK 2 (self-classification): Risk of water pollution.
|
R-phrases
|
R65
|
Harmful: may cause lung damage if swallowed.
|
|
|
16.
|
OTHER INFORMATION
General information
|
The information is based on current knowledge. However, this does entail a guarantee as to the characteristics of the product nor provide grounds for a contractual agreement.
|
Material safety data sheet issued by
|
Department FE
|
Contact
|
Hr. Klose
|
Revised
|
2002-08-09
|
Issued
|
2002-08-09
|
|
