PRE-RELEASE
Control module
| Control module |
| Removing |
| 1. |
Lower the soft top and position the soft top cover straight up.
|
|
| 2. |
Remove the side trim. See
Rear side trim, CV
.
|
|
| 3. |
Remove the control module.
|
|
| 4. |
Unplug the connector.
|
|
| Fitting |
| 1. |
Plug in the connector.
|
|
| 2. |
Fit the control module and tighten the nuts.
|
|
| 3. |
Fit the side trim. See
Fitting
.
|
|
| 4. |
Connect the diagnostics tool and erase any diagnostic trouble code.
|
|
| 5. |
Run the soft top up and down a few times and check the function.
|
|
