PRE-RELEASE
Rear door
| Rear door |
| To remove |
| 1. |
Open the front door so that the grommet for the rear door wiring harness in the B-pillar is accessible.
|
|
| 2. |
Pull out the wiring harness rubber passage from the B-pillar.
|
|
| 3. |
Pull out the connectors and unplug.
|
|
| 4. |
Open the rear door.
|
|
| 5. |
Drive out the bushing from the door stop.
|
|
| 6. |
Remove the hinge bolts.
|
|
| 7. |
Carefully lift the door off its hinges. The door must be opened completely before it can be removed.
|
|
Connect the diagnostics tool and erase any diagnostic trouble code.
| To fit |
Fit in reverse order.
Tightening torque:
Hinge bolts: 47 Nm (35 lbf ft).
| Note | ||
|
In order to get the correct fit between the door and the wing, it may be necessary to lift slightly at the rear edge of the door. |
| Adjustment |
Adjust the door, se Adjustment of front and rear doors
