PRE-RELEASE
Door window front seal, CV
| Door window front seal, CV |
| To remove |
| 1. |
Remove the door mirror.
|
|
| 2. |
Remove the door trim.
|
|
| 3. |
Remove the inner window seal.
|
|
| 4. |
Loosen the outer window seal at the front edge.
|
|
| 5. |
Remove the seal for the door mirror mounting.
|
|
| To fit |
| 1. |
Affix the new seal at the point on the sheet metal flange. Use adhesive 30 08 075 3M Super Weatherstrip.
|
||||||||||
| 2. |
Press down the seal into the window channel.
|
|
| 3. |
Raise the window and pull down the seal so that it seals around the front edge of the window.
|
|
| 4. |
Bend up the seal and apply adhesive 30 08 075 3M Super Weatherstrip to the lower part.
|
|
| 5. |
Fasten the seal with adhesive.
|
|
| 6. |
Fit the inner and outer window seal on the door.
|
|
| 7. |
Fit the door mirror.
|
|
