PRE-RELEASE
Trim, B-pillar, 3D
| Trim, B-pillar, 3D |
| 1. |
Undo the front bolt on the slide rail and remove the belt.
|
|
| 2. |
Remove the air vent grille by unsnapping it from the inner B-pillar trim.
|
|
| 3. |
Remove the screw securing the inner B-pillar trim to the outer one.
|
|
| 4. |
Pull off the inner pillar trim (snap fasteners).
|
|
| 5. |
Remove the belt adjuster.
|
|
| 6. |
Remove the outer B-pillar trim (fastened with 2 clips).
|
|
| To fit |
Fit in reverse order.
Tightening torque:
Slide rail retaining bolt: 45 Nm (33 lbf ft)
