PRE-RELEASE
Trim, B-pillar, 5D
| Trim, B-pillar, 5D |
| 1. |
Move the front seat as far forward as possible.
|
|
| 2. |
Undo the front and rear scuff plates (fastened with clips).
|
|
| 3. |
Loosen the door weather seals around the B-pillar.
|
|
| 4. |
Undo the seat-belt anchorage on the front seat, refer to the method for the front seat in section "Seats, cushions and mats".
|
|
| 5. |
Remove the air vent grille (snap fasteners).
|
|
| 6. |
Undo the top inner pillar trim (secured with snap fasteners) by grasping the top of the trim and carefully pulling it downwards while carefully bending the snap fasteners with a screwdriver.
|
|
| 7. |
Remove the seat belt through the opening in the trim.
|
|
| 8. |
Undo the bottom of the pillar trim (fastened with clips).
|
|
| 9. |
Remove the belt adjuster, see "Front seat belts, 5D" in the section "Interior equipment".
|
|
| 10. |
Remove the top outer pillar trim (fastened with clips).
|
|
| To fit |
Fit in reverse order.
