PRE-RELEASE
Control wire
| Control wire |
| 1. |
Remove the control panel. See
.
|
|
| 2. |
Remove both clips that secure the wire to the climate control unit and then remove the wire.
|
|
| Fitting |
| 1. |
Refit the control wire at the rear of the control panel. The wire should be positioned above the control shaft.
|
|
| 2. |
Press on the clip that secures the wire.
|
|
| 3. |
Plug in the connectors.
|
|
| 4. |
Refit the control panel.
|
||||||||||
| 5. |
Fit the wire on the lever for the air-mixing damper.
|
|
| 6. |
Turn the temperature control knob to max cooling.
|
|
| 7. |
Push the air-mixing damper lever forwards as far as possible.
|
|
| 8. |
Press the clips securing the cable sheathing to the climate control unit.
|
|
| 9. |
Check to make sure that the air-mixing damper seals correctly in respective end positions by turning the heater control to both end positions.
|
|
| 10. |
Refit the panel on the centre console.
|
|
| 11. |
Refit the glove box. See 8:2 Interior equipment.
|
|
