PRE-RELEASE
Fan resistor
| Fan resistor |
| Removing |
| 1. |
Remove the wiper arms.
|
|
| 2. |
Remove the cover over the bulkhead.
|
|
| 3. |
Remove the water deflector.
|
|
| 4. |
Remove the wiper unit.
|
|
| 5. |
Remove the fresh-air filter.
|
|
| 6. |
Unplug the ventilation fan electric connector.
|
|
| 7. |
Remove the fresh-air filter frame by removing the four retaining bolts.
|
|
| 8. |
Remove the bolt that secures the fan resistor.
|
|
| 9. |
Unplug the fan resistor electric connections.
|
|
| Fitting |
| 1. |
Plug in the electric connections for the fan resistor.
|
|
| 2. |
Fit the fan resistor and tighten the bolt.
|
|
| 3. |
Refit the fresh-air filter frame with the four bolts.
|
|
| 4. |
Plug in the ventilation fan connector.
|
|
| 5. |
Refit the fresh-air filter.
|
|
| 6. |
Fit the wiper unit.
|
|
| 7. |
Refit the water deflector.
|
|
| 8. |
Refit the cover over the bulkhead.
|
|
| 9. |
Refit the wiper arms.
|
|
