PRE-RELEASE
Slide mechanism, sunroof
| Slide mechanism, sunroof |
| 1. |
Remove the glass hatch.
|
|
| 2. |
Pull the spring off the shaft.
|
|
| 3. |
Remove the retaining screw at the front so that the guide can be tilted forward, then push out the pin.
|
|
| 4. |
Remove the circlip for the rear pin and push out the pin.
|
|
| To fit |
| 1. |
Fit the spring on the guide rail.
|
|
| 2. |
Insert the rear shaft and fit the circlip.
|
|
| 3. |
Insert the front shaft. Turn the shaft with cone end out.
|
|
| 4. |
Bend the rear guide and tighten the screw.
|
|
| 5. |
Refit the glass hatch.
|
|
| Slide mechanism, adjustment of adjusting blocks |
| 1. |
Remove the glass hatch.
|
|
| 2. |
Loosen the screws that secure the adjusting blocks.
|
|
| 3. |
Adjust so that the blocks enter their grooves without touching them when the sunroof is opened.
|
|
