SAAB WIS ONLINE

PRE-RELEASE

30 15 286 Vaseline

30 15 286 Vaseline


Specifications

Klüber Syntheso Pro AA2. Synthetic assembly grease. For lubricating and greasing nitrile rings or EPDM rubber materials. 25 gramme tube.

Saab application

NOTE! For AC/ACC with refrigerant R134A.

Packaging

1

Transport

No restrictions apply when transporting this product.

Directives



Material safety data sheet


1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Trade name

SYNTHESO PRO AA 2 (O-ring grease)

Part number

6025 / 6051

Product type/application

Lubrication grease

Manufacturer - supplier

Klüber Lubrication Skandinavien

Box 601

194 26 UPPLANDS VÄSBY

Tel: +46 (0) 8 590 986 00



2. COMPOSITION/INFORMATION ON INGREDIENTS

Ingredient

CAS-no.

Content (%)

Hazard symbol/R-phrases

Polyalkylene glycol oil



approx. 90

Silica gel emulsifier



approx. 10



Key

FB/FH/FM = Hazard code for fire/health/environment

T+ = Very toxic

T = Toxic

C = Corrosive

Xn = Harmful

Xi = Irritant

V = Moderately harmful

IK = Not subject to labelling

E = Explosive

O = Oxidizing

F+ = Extremely flammable

F = Highly flammable

N = Dangerous for the environment



3. HAZARDS IDENTIFICATION

Product not classed as environmentally hazardous or harmful.

4. FIRST AID MEASURES

Inhalation

Not applicable.

Skin

Wash with soap and water.

Eyes

Flush with plenty of water until irritation subsides. In case of persistent discomfort, seek medical advice.

Ingestion

Do not induce vomiting. Seek medical advice.



5. FIRE-FIGHTING MEASURES

Suitable extinguishing media

Foam, powder, carbon dioxide (CO 2 ) or water spray.

Unsuitable extinguishing media

Water jet.

Special exposure hazards

In case of fire, carbon monoxide and hydrocarbons may be produced.

Other instructions

Do not breathe fumes from fire. Cool containers exposed to fire with water. Dispose of remains after fire and firewater in accordance with local environmental regulations.



6. SPILLAGE/ACCIDENTAL RELEASE MEASURES

Personal precautions

Warning for slippery surface from spillage.

Personal precautions

Warning for slippery surface from spillage.

Environmental precautions

Prevent release into drains. Protect surface water and ground water.

Methods for cleaning up

Confine and collect with absorbent material such as universal binder or sawdust.



7. HANDLING AND STORAGE

Storage

Do not store with food stuffs or oxidizing agents. Keep in original packaging at room temperature.



8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Personal precautions

Avoid repeated and prolonged skin contact. Change contaminated clothing. Ensure good personal hygiene. Use replenishing hand cream.



9. PHYSICAL AND CHEMICAL PROPERTIES

Form/state

Paste

Odour

Characteristics of oil

Colour

Beige

Flash point

> 200°C (base oil)

Density

Approx. 1.0 g/cm 3 at 20°C

Solubility in water

Insoluble



10. STABILITY AND REACTIVITY

Stability

Reacts with strong oxidizing agents, e.g. pure oxygen.



11. TOXICOLOGICAL INFORMATION

Skin contact

May cause dry skin/contact eczema after repeated or prolonged contact.

Miscellaneous

LD50 oral: > 2 g/kg rat (figure from literature).



12. ECOLOGICAL INFORMATION

General information

The product is not soluble in water.



13. DISPOSAL CONSIDERATIONS

Disposal considerations

Do not empty into drains. If spillage or waste cannot be recycled or disposed of at site (NOTE: requires authorization), contact a contractor approved by the local authority.



14. TRANSPORT INFORMATION

Transport class

Not classified for transport.



15. REGULATORY INFORMATION

Hazard class

Not subject to labelling.

Hazard symbol

Not subject to labelling.



16. OTHER INFORMATION

Issued

1998-11-13




PRE-RELEASE