30 30 699 Adhesive kit rear window CV
|
|
30 30 699 Adhesive kit rear window CV
|
1 Betaseal 1400 (1K), 300 ml
1 Betaprime 5001, 30 ml
1 Betawipe VP 04604, 30 ml 1 Nozzle 1 Primer applicator 1 Cleaning cloth
For glued rear window on Saab 900 Convertible M95-.
1
No restrictions apply when transporting this product.
Contains isocyanates. Repeated or prolonged exposure with scratched or sensitive skin may cause allergies.
|
Material safety data sheet
|
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product name
|
Betaseal 1400
|
Manufacturer - supplier
|
Gurit Essex AG
Freienbach, Switzerland
|
Distributer
|
SAAB-ANA Konsult AB
Box 1030
611 29 NYKÖPING
Tel: +46 (0) 155-24 94 50
|
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient
|
CAS-no.
|
Content (%)
|
Hazard symbol/R-phrases
|
Diphenylmethane-4,4-diisocyanate (MDI)
|
101-68-8
|
<1 (approx. 0.2)
|
Xn; R20/21 Xi; R36, R42/43
|
White spirit
|
8030-30-6
|
1
|
Fo: R10
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
|
3.
|
HAZARDS IDENTIFICATION
Health hazards
|
Not subject to labelling in accordance with KIFS 1994:12. The level of MDI is such that a certain risk of sensitization cannot be completely ruled out. Persons already sensitized may react with the constituent MDI.
|
Fire hazards
|
Not flammable.
|
|
|
4.
|
FIRST AID MEASURES
Inhalation
|
Fresh air and rest. In case of breathing difficulties, seek medical advice. In case of grave symptoms - artificial respiration if necessary and take immediately to hospital.
|
Skin
|
Take off immediately contaminated clothing. Wash carefully with soap and water. In case of symptoms, seek medical advice.
|
Eyes
|
Flush immediately with water. Seek medical advice if symptoms persist.
|
Ingestion
|
Seek medical advice if a large amount has been swallowed.
|
Information for physicians
|
Risk of asthmatic breathing difficulties on inhalation.
|
|
|
5.
|
FIRE-FIGHTING MEASURES
General information
|
Produces vapours, which can form an explosive mixture with air, at temperatures below room temperature. The vapours are more dense than air and can collect in low-lying areas.
|
Suitable extinguishing media
|
Extinguish fires with foam, powder, water spray or carbon dioxide.
|
Safety precautions
|
Move or cool with water containers in the vicinity of fire.
|
Hazardous decomposition products
|
Combustion of the contents produces toxic fumes. Wear protective respiratory equipment.
|
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Provide good ventilation. Avoid direct contact with the product. Be aware of the risk of ignition and explosion.
|
Environmental precautions
|
Prevent release into drains.
|
Methods for cleaning up
|
Soak up with a suitable non-flammable, absorbent material.
|
|
|
7.
|
HANDLING AND STORAGE
Handling
|
Ensure good ventilation.
|
Storage
|
Keep containers tightly closed in a dry place between 15 and 30°C.
|
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Advice for safe handling
|
Use only in well-ventilated places. Work procedures should be designed to avoid direct contact with the product. Provisions for eye flushing must be provided.
|
Technical safety precautions
|
In case of insufficient ventilation, provide mechanical ventilation or spot extraction.
|
Personal protection equipment
|
In case of insufficient ventilation, wear a full-face respirator with type A (brown) gas filter and type II b dust filter. In case of risk of direct contact, wear protective gloves, eye/face protection and protective clothing.
|
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Polyurethane-based paste
|
Odour
|
of solvent
|
Colour
|
Black
|
Solubility in water
|
Insignificant
|
Density
|
1.22 g/cm
3
|
Flash point
|
>150 °C
|
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Constituent isocyanates can react with water, amines, alcohols and acids. Heating can cause the release of harmful substances - even from hardened material.
|
|
|
11.
|
TOXICOLOGICAL INFORMATION
Inhalation
|
The constituent isocyanate is not particularly volatile and the product only contains very small amounts. The risk of exposure is therefore very small but does exist in case of heating or handling very large quantities. Inhalation of the constituent isocyanate may cause stinging and a prickling sensation in the respiratory system, and even nausea and vomiting. May produce influenza-like symptoms, such as soar throat, coughing, fever, shivers, headache and muscular aches. May cause asthmatic breathing difficulties. Note that hypersensitive persons can experience breathing problems at very low concentrations, even under the set limits, and that symptoms may be delayed, appearing several hours after exposure.
|
Skin
|
Small risk allergic eczema, especially for persons already sensitized.
|
Eyes
|
Causes stinging on contact with the eyes.
|
Toxicological data
|
Diphenylmethane-4,4´-diisocyanate; LD50 oral, rat >4700 mg/kg; LC50 inhalation, rat 178 mg/m
3
; allergen.
|
|
|
12.
|
ECOLOGICAL INFORMATION
N/A
|
|
13.
|
DISPOSAL CONSIDERATIONS
Disposal considerations
|
The handling of adhesive waste is governed by the provisions on environmentally dangerous waste (SFS 1985:841)
|
|
|
14.
|
TRANSPORT INFORMATION
Transport name
|
Not classed for transport according to following regulations. (FN, IMDG, ADR/RID, DGR)
|
|
|
15.
|
REGULATORY INFORMATION
Hazard symbols
|
Not classed. Must be labelled: Contains isocyanates. Refer to information from the manufacturer.
|
|
|
16.
|
OTHER INFORMATION
Sources of information
|
The information on constituent isocyanate has primarily been taken from the following references:
1. Skyddsblad nr 84, safety sheet for chemical products, Association of Swedish Chemical Industries.
2. Sax's dangerous properties of industrial materials, R.J Lewis (Ed.), Van Nostrand Reinhold, New York, 1992.
|
General information
|
Note: When working with products containing isocyanates, observe the provisions of the Swedish National Board of Occupational Safety and Health on thermosetting plastics (AFS 1993:4). The provisions cover the design of work premises, protective equipment, medical check-up of the persons working with thermosetting plastics, checking air pollutants and suchlike.
|
Issued
|
1995-06-26
|
|
|
Material safety data sheet
|
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product name
|
BETAPRIME 5001
|
Manufacturer - supplier
|
SAAB-ANA Konsult AB
Box 1030
611 29 NYKÖPING
Tel: +46 (0) 155-24 94 82
Fax: +46 (0) 155-24 94 71
Tel (emergency): 112
|
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient
|
CAS-no.
|
Content (%)
|
FM
|
FB
|
FH
|
R-phrases
|
Carbon black
|
1333-86-4
|
1-15
|
|
|
|
|
Ethylacetate
|
41-78-6
|
1-10
|
|
|
Xi
|
R11-36-66-67
|
Toluene
|
108-88-3
|
1-12.5
|
|
|
Xn
|
R20
|
Methoxybutyl acetate
|
4435-53-4
|
1-20
|
|
|
Xi
|
R36
|
Methyl ethyl ketone
|
78-93-3
|
20-50
|
|
|
Xi
|
R36-66-67
|
Solvent naphtha (petroleum), light
|
64742-95-6
|
1-2
|
N
|
|
Xn
|
R10-65-37-66-517/5
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
|
3.
|
HAZARDS IDENTIFICATION
Health hazards
|
Irritating to eyes. Defats the skin and after prolonged or repeated contact may cause skin to dry and crack. Inhalation of high concentrations may cause dizziness, headaches and nausea.
|
Fire hazards
|
Highly flammable.
|
|
|
4.
|
FIRST AID MEASURES
Other information
|
Take off contaminated clothing immediately.
|
Inhalation
|
Move the casualty into fresh air. Seek medical advice immediately. Effects may be delayed. Keep the casualty warm and allow to rest. Perform artificial respiration if the casualty stops breathing or breathes irregularly.
|
Skin
|
Wash skin immediately with soap and water. Seek medical advice if irritation persists.
|
Eyes
|
Flush eyes immediately with plenty of water for several minutes. Hold eyes wide open. Seek medical advice immediately.
|
Ingestion
|
Do not induce vomiting. Seek medical advice immediately.
|
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Foam or powder. Large fires can be extinguished with water spray.
|
Fire/explosions risks
|
Vapours can form an explosive mixture with air. In case of fire, harmful and irritating gases can form (e.g. carbon and nitrous oxides).
|
Special protective equipment for firefighters
|
Complete protective equipment including respiratory equipment
|
Other information
|
Do not breathe fumes from the fire. Move containers in the vicinity of the fire immediately or cool with water.
|
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Avoid contact with skin, eyes and clothes. Do not breathe vapours. Wear the prescribed protective equipment (see heading 8).
|
Environmental precautions
|
Keep the product away from drains, the ground and watercourses. Contact the appropriate authority immediately if the product enters drains, lakes or watercourses.
|
Methods for cleaning up
|
Soak up using non-flammable absorbent material such as sand, earth, kieselguhr or vermikulite. Place in suitable, open container. Keep contents moist. Dispose of as directed under heading 13.
|
Other information
|
Remove all sources of ignition - No smoking. Provide good ventilation. Keep unauthorized persons away from the spillage. Warning for slippery surface.
|
|
|
7.
|
HANDLING AND STORAGE
Special properties and risks
|
The vapours are heavier than air and collect at floor level and low-lying areas. Flammable vapours that can combine with air to form an explosive mixture are produce at room temperature.
|
Advice for safe handling
|
Avoid contact with eyes, skin and clothing. Do not breathe vapours. Use only in well ventilated areas. Mechanical ventilation and spot extraction may be necessary. Store away from direct sunlight, heat, fire and other sources of ignition. Take precautionary measures against static discharges. Use only electrical equipment with explosion protection. See the instructions on the label.
|
Storage instructions
|
Store in a dry, well-ventilated place away from heat, fire and direct sunlight. No smoking. Electrical installations and equipment must have explosion protection. Follow regulations for storage of flammable liquids. Keep cool and dry, away from food, drink and animal feeding stuffs. Unauthorised persons must not have access to the storage area. Keep in original packaging. Keep container tightly closed.
|
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Chemical name
|
Limit
|
Carbon black
|
3 mg/m
3
|
Ethylacetate
|
500 mg/m
3
|
Toluene
|
200 mg/m
3
|
Methyl ethyl ketone
|
150 mg/m
3
|
Solvent naphtha (petroleum), light
|
120 mg/m
3
|
Control procedures
|
Use only in well-ventilated areas. Spot extraction equipment or mechanical ventilation may be necessary. Do not smoke, eat or drink while working with the product. Good personal hygiene is essential. Wash hands before taking a break and on completion of the work. Take off contaminated clothing immediately. The use of a barrier cream is recommended.
|
Respiratory equipment
|
A full-face or half-face mask with filter for organic vapours must be used in case of high vapour concentrations or if ventilation is inadequate.
|
Eye protection
|
Close-fitting protective glasses with side shields must be used if there is a risk of direct contact or splashing.
|
Protective gloves
|
Solvent-resistant gloves. Use a barrier cream on skin.
|
Skin and body protection
|
Solvent-resistant protective clothing.
|
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Liquid
|
Odour
|
Characteristic
|
Colour
|
Black
|
Solubility in water
|
Reacts with water
|
Flash point
|
-9 °C
|
Boiling point
|
77 °C
|
Explosion range
|
approx. 8.8-11.5 vol%
|
Vapour pressure
|
approx. 200 mbar at 20°C
|
Density
|
0.99 g/cm
3
|
Viscosity
|
< 16s/23°C/4 mm
|
Autoignition point
|
approx. 410°C
|
Vapour density (air=1)
|
approx. 2.5
|
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Can react with the moisture in the air. Keep away from moisture. Vapours can form explosive mixture with air.
|
Reacts with
|
Avoid contact with other chemical products. Avoid contact with strong acids, amines and oxidizing agents.
|
Hazardous decomposition products
|
In case or fire or intense heat, carbon dioxide, carbon monoxide, nitrous oxides and toxic fumes are produced. Risk of peroxide mixtures.
|
|
|
11.
|
TOXICOLOGICAL INFORMATION
Inhalation
|
Irritating to the respiratory system. Inhalation may cause headaches, dizziness, drowsiness, muscular weakness, narcotic effects and, in exceptional cases, unconsciousness. Inhalation of high concentrations may damage the lever and kidneys and affect the central nervous system.
|
Skin
|
Prolonged or repeated skin contact defats the skin and may cause irritation and dermatitis. Substances in the product can be absorbed through the skin. Repeated exposure can cause sensitization and allergic reactions (eczema).
|
Eyes
|
Irritating to the eyes and may cause temporary damage.
|
Ingestion
|
If swallowed, may cause stinging in mouth and throat, nausea and stomach pains.
|
Sensitization
|
Sensitizing effects possible after inhalation or skin contact.
|
|
|
12.
|
ECOLOGICAL INFORMATION
Mobility
|
Insoluble in water.
|
Ecotoxicity
|
Test data for primary component, methyl ethyl ketone:
Fish toxicity: Leuciscus idus LC50 4600 mg/l
Toxicity for daphnia: D.Magna EC50 7060 mg/l
Toxicity for bacteria: Pseudomonas putida EC0 1150 mg/l
|
Other information
|
Do not empty into water, drains or onto ground.
|
|
|
13.
|
DISPOSAL CONSIDERATIONS
Disposal considerations
|
Dispose of product waste as hazardous waste in accordance with regulations. Recommended method of destruction: incineration in facilities with flue-gas purification. EWC-code 07 02 04, other organic solvents, washing liquids and mother liquors.
|
|
|
14.
|
TRANSPORT INFORMATION
Road (ADR)
|
UN-no.:
1139
Hazardous goods
Marg no.
|
Class:
3, 5 (b)
|
Label
Hazard no.
|
Rail (RID)
|
UN-no.:
1139
|
Class:
3, 5 (b)
|
Label
Hazard no.
|
Sea (IMDG)
|
UN-no.:
1139
Hazardous goods
Class:
3.2
EmS:
3-05
|
Page
MFAG:
300
Label
Marine poll:
No
|
Packaging group:
II
Sub. Risk
|
IATA (air)
|
UN-no.:
1139
Hazardous goods
|
Class:
3
Sub. Risk
|
Label
Packaging group:
II
|
Proper shipping name
|
Coating solution
|
|
|
15.
|
REGULATORY INFORMATION
Labelling
|
Irritant, Highly flammable
|
Contains
|
Contains isocyanates. See information from manufacturer.
|
References
|
See provisions of the Swedish National Board of Occupational Safety and Health on thermosetting plastics.
|
R-phrases
|
R11
|
Highly flammable.
|
|
|
R36
|
Irritating to eyes.
|
|
|
R66
|
Repeated exposure may cause skin dryness or cracking.
|
|
|
R67
|
Vapours may cause drowsiness and dizziness.
|
S-phases
|
S2
|
Keep out of the reach of children.
|
|
|
S16
|
Keep away from sources of ignition - No smoking.
|
|
|
S23
|
Do not breathe vapour/spray.
|
|
|
S37
|
Wear suitable gloves.
|
|
|
S46
|
If swallowed, seek medical advice immediately and show this container or label.
|
|
|
S51
|
Use only in well-ventilated areas.
|
|
|
16.
|
OTHER INFORMATION
General information
|
This material safety data sheet is only intended to provide guidance as to safe handling with regard to health, safety and the environment. The information contained in this material safety data sheet is not a specification of the product and must not be considered as a guarantee of any specific properties.
|
Issued
|
2001-05-01
|
|
|
Material safety data sheet
|
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product name
|
BETAWIPE VP04604
|
Manufacturer - supplier
|
SAAB-ANA Konsult AB
Box 1030
611 29 NYKÖPING
Tel: +46 (0) 155-24 94 82
Fax: +46 (0) 155-24 94 71
Tel (emergency): 112
|
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient
|
CAS-no.
|
Content (%)
|
FM
|
FB
|
FH
|
R-phrases
|
3-mercaptopropyl-trimethoxysilane
|
4420-74-0
|
1-10
|
N
|
|
Xn
|
R21/22-51/53
|
3-(2-aminoethylamino)propyltrimethoxysilane
|
1760-24-3
|
1-10
|
|
|
Xi
|
R36/38-43
|
Isopropanol
|
67-63-0
|
80-100
|
|
F+
|
Xi
|
R11-36-67
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
|
3.
|
HAZARDS IDENTIFICATION
Health hazards
|
Irritating to eyes, skin and respiratory system. May cause sensitisation and allergic reaction after skin contact. Breathing high concentrations may cause dizziness, headaches and nausea. Defats the skin and after prolonged or repeated contact cause the skin to dry and crack.
|
Fire hazards
|
Highly flammable.
|
|
|
4.
|
FIRST AID MEASURES
Other information
|
Take off contaminated clothing immediately.
|
Inhalation
|
Move the casualty into fresh air. Seek medical advice immediately. Keep the casualty warm and allow to rest. Perform artificial respiration if the casualty stops breathing or breathes irregularly.
|
Skin
|
Wash skin immediately with soap and water. Seek medical advice if irritation persists.
|
Eyes
|
Flush eyes immediately with plenty of water for several minutes. Hold eyes wide open. Seek medical advice immediately.
|
Ingestion
|
Do not induce vomiting. Seek medical advice immediately.
|
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Alcohol-resistant foam, carbon dioxide or water spray.
|
Unsuitable extinguishing media
|
Water jet.
|
Fire/explosions risks
|
Vapours can form an explosive mixture with air. In case of fire, flammable and irritating gases can form.
|
Special protective equipment for firefighters
|
Complete protective equipment including respiratory equipment.
|
Other information
|
Do not breathe fumes from the fire. Move containers in the vicinity of the fire immediately or cool with water.
|
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Avoid contact with skin, eyes and clothes. Do not breathe vapours. Wear the prescribed protective equipment (see heading 8).
|
Environmental precautions
|
Keep the product away from drains, the ground and watercourses. Contact the appropriate authority immediately if the product enters drains, lakes or watercourses.
|
Methods for cleaning up
|
Soak up using non-flammable absorbent material such as sand, earth, kieselguhr or vermikulite. Dispose of as directed under heading 13.
|
Other information
|
Remove all sources of ignition - No smoking. Provide good ventilation. Keep unauthorized persons away from the spillage. Warning for slippery surface.
|
|
|
7.
|
HANDLING AND STORAGE
Special properties and risks
|
The vapours are heavier than air and collect at floor level and low-lying areas. Flammable vapours that can combine with air to form an explosive mixture are produce at room temperature.
|
Advice for safe handling
|
Avoid contact with eyes, skin and clothing. Do not breathe vapours. Use only in well ventilated areas. Mechanical ventilation and spot extraction may be necessary. Store away from direct sunlight, heat, fire and other sources of ignition. Take precautionary measures against static discharges. Use only electrical equipment with explosion protection. See the instructions on the label.
|
Storage instructions
|
Store in a dry, well-ventilated place away from heat, fire and direct sunlight. No smoking. Electrical installations and equipment must have explosion protection. Follow regulations for storage of flammable liquids. Keep cool and dry, away from food, drink and animal feeding stuffs. Unauthorised persons must not have access to the storage area. Keep in original packaging. Keep container tightly closed.
|
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Substance
|
Limit
|
Isopropanol
|
350 mg/m
3
|
Control procedures
|
Use only in well-ventilated areas. Spot extraction equipment or mechanical ventilation may be necessary. Do not smoke, eat or drink while working with the product. Good personal hygiene is essential. Wash hands before taking a break and on completion of the work. Take off contaminated clothing immediately. The use of a barrier cream is recommended.
|
Respiratory equipment
|
A full-face or half-face mask with filter for organic vapours must be used in case of high vapour concentrations or if ventilation is inadequate.
|
Eye protection
|
Close-fitting protective glasses with side shields must be used if there is a risk of direct contact or splashing.
|
Protective gloves
|
Solvent-resistant gloves. Use a barrier cream on skin.
|
Skin and body protection
|
Wear protective clothing if there is a risk of direct contact or splashes.
|
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Liquid
|
Odour
|
Alcohol
|
Colour
|
Colourless
|
Solubility in water
|
Miscible
|
Density
|
0.79 g/cm
3
|
Boiling point
|
82 °C
|
Flash point
|
13 °C
|
Explosion limits
|
2-12 vol. %
|
Vapour pressure
|
approx. 40 mbar at 20°C
|
Viscosity
|
approx. 50 s/23°C/2 mm
|
Autoignition point
|
approx. 425°C
|
Vapour density (air=1)
|
2.1
|
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Vapours can form explosive mixture with air.
|
Reacts with
|
Avoid contact with strong oxidizing agents.
|
Hazardous decomposition products
|
In case or fire or intense heat, carbon dioxide, carbon monoxide and toxic fumes are produced.
|
|
|
11.
|
TOXICOLOGICAL INFORMATION
Inhalation
|
Irritating to the respiratory system. Inhalation may cause headaches, dizziness, drowsiness, muscular weakness, narcotic effects and, in exceptional cases, unconsciousness. Inhalation of high concentrations may damage the lever and kidneys and affect the central nervous system.
|
Skin
|
Prolonged or repeated skin contact defats the skin and may cause irritation and dermatitis. Repeated exposure can cause sensitization and allergic reactions (eczema).
|
Eyes
|
Irritating to the eyes and may cause temporary damage.
|
Ingestion
|
If swallowed, may cause stinging in mouth and throat, nausea and stomach pains as well as similar effect to inhalation.
|
Sensitization
|
Sensitizing effects possible after skin contact.
|
|
|
12.
|
ECOLOGICAL INFORMATION
Degradability
|
The solvent, isopropanol, decomposes readily. The product also contains substances that do not readily decompose.
|
Bioaccumulation
|
The solvent, isopropanol, does not bioaccumulate. Data lacking for other components.
|
Ecotoxicity
|
Fish toxicity: LC50 > 100 mg/l (regarding isopropanol)
|
Other information
|
Do not empty into water, drains or onto ground.
|
|
|
13.
|
DISPOSAL CONSIDERATIONS
Disposal considerations
|
Dispose of product waste as hazardous waste in accordance with regulations. Recommended method of destruction: incineration in facilities with flue-gas purification. EWC-code 07 01 04, other organic solvents, washing liquids and mother liquors. EWC-code 07 06 04, other organic solvents, washing liquids and mother liquors.
|
|
|
14.
|
TRANSPORT INFORMATION
Road (ADR)
|
UN-no.:
1219
Hazardous goods
Marg no.
|
Class:
3, 3 (b)
|
Label
Hazard no.
|
Rail (RID)
|
UN-no.:
1219
|
Class:
3, 3 (b)
|
Label
Hazard no.
|
Sea (IMDG)
|
UN-no.:
1219
Hazardous goods
Class:
3.2
EmS:
3-06
|
Page
MFAG:
305
Label
Marine poll:
No
|
Packaging group:
II
Sub. Risk
|
IATA (air)
|
UN-no.:
1219
Hazardous goods
|
Class:
3
Sub. Risk
|
Label
Packaging group:
II
|
Proper shipping name
|
Isopropanol mixture
|
|
|
15.
|
REGULATORY INFORMATION
Labelling
|
Irritant, Highly flammable
|
R-phrases
|
R11
|
Highly flammable.
|
|
|
R36
|
Irritating to eyes.
|
|
|
R43
|
May cause sensitization by skin contact.
|
|
|
R67
|
Vapours may cause drowsiness and dizziness.
|
S-phases
|
S2
|
Keep out of the reach of children.
|
|
|
S7
|
Keep container tightly closed
|
|
|
S16
|
Keep away from sources of ignition - No smoking.
|
|
|
S26
|
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
|
|
S36/37
|
Wear suitable protective clothing and gloves.
|
|
|
S46
|
If swallowed, seek medical advice immediately and show this container or label.
|
|
|
16.
|
OTHER INFORMATION
General information
|
This material safety data sheet is only intended to provide guidance as to safe handling with regard to health, safety and the environment. The information contained in this material safety data sheet is not a specification of the product and must not be considered as a guarantee of any specific properties.
|
Issued
|
2001-05-07
|
|
