87 81 684 Universal paste
|
|
87 81 684 Universal paste
|
Molykote G-rapid plus paste. For use when fitting and wearing-in load surfaces. Prevents ”Stickslip” on press fits. Apply thinly and evenly on grease-free surface. Temperature -35 °C to +450 °C. 50 g tube.
Universal paste for splines on primary shaft.
1
No restrictions apply when transporting this product.
Avoid skin and eye contact.
|
Material safety data sheet
|
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product name
|
Molykote G-rapid plus
|
Application
|
Lubricant for fitting and wearing-in.
|
Part no.
|
MPGRP
|
Manufacturer - supplier
|
G.A. LINDBERG AB
Box 6044
SE-164 06 KISTA
www.galindberg.se
Tel: +46 8 703 02 00
Fax: +46 8 751 40 41
|
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient
|
CAS-no.
|
Content (%)
|
FM
|
FB
|
FH
|
R-phrases
|
White mineral oil
|
8042-47-5
|
47
|
|
|
T
|
45
|
Calcium hydroxide
|
1305-62-0
|
20
|
|
|
Xi
|
36/38
|
Calcium fluoride
|
7789-75-5
|
22
|
|
|
|
|
Copper
|
7440-50-8
|
8
|
|
|
|
|
Polybutene
|
9003-29-6
|
6
|
|
|
|
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
|
3.
|
HAZARDS IDENTIFICATION
The product has no dangerous properties according to KIFS 1994:12 with amendments.
|
|
4.
|
FIRST AID MEASURES
Inhalation
|
Move to fresh air.
|
Skin
|
Wipe off with paper towling or similar. Flush with water.
|
Eyes
|
Rinse with water.
|
Ingestion
|
First aid not required.
|
Health check-up
|
Normal health check-up.
|
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Water mist, foam, carbon dioxide and powder.
|
Special protective equipment for firefighters
|
A self-contained respirator and protective clothing should be worn.
|
Other information
|
Determine the need to evacuate or isolate the area according to your local emergency plan. Move or keep containers in the vicinity of the fire cool with water spray.
|
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Wear personal protective equipment. See section 8.
|
Environmental precautions
|
Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers. Do not empty into drains.
|
Methods for cleaning up
|
Scrape up and place in a lockable container. Absorb with an inert absorbent material, such as sand, kieselguhr, sawdust or similar.
|
Other information
|
NOTE: The spilled product produces an extremely slippery surface.
|
|
|
7.
|
HANDLING AND STORAGE
Advice for safe handling
|
Avoid skin and eye contact.
|
Storage instructions
|
Do not store with oxidizing agents. Keep container closed and store away from water or moisture. Good ventilation in storage premises recommended.
|
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Chemical identity
|
Limit
|
White mineral oil (oil mist)
|
1 mg/m³
|
Control procedures
|
Follow good industrial hygiene procedures. Wash hands before breaks and immediately after using this product.
|
Respiratory equipment
|
Wear a suitable respirator if the product is used in such a way as to generate a risk of damage to the respiratory system.
|
Eye protection
|
Wear eye/face protection.
|
Protective gloves
|
Wear plastic or rubber gloves in case of prolonged or repeated contact with the product.
|
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Paste
|
Odour
|
mild
|
Colour
|
Black
|
Solubility
|
|
Density
|
1.26 g/cm
3
|
Flash point
|
> 200°C
|
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Stable under normal conditions.
|
Reacts with
|
Can react with strong oxidizing agents.
|
Hazardous decomposition products
|
Silica. Carbon dioxide and traces of incompletely combusted carbon compounds. Toxic vapours from fluorine compounds. Metal products. Nitrogen oxides. Heating the product to above 150°C can liberate small amounts of formaldehyde.
|
Other information
|
Formaldehyde vapour, which can be liberated at high temperatures, is harmful by inhalation and irritating to eyes and respiratory system at breathing concentration less than 1 ppm.
|
|
|
11.
|
TOXICOLOGICAL INFORMATION
Inhalation
|
No adverse effects are normally expected. Formaldehyde vapour, which can be liberated at temperatures above 150 degrees, is harmful by inhalation and irritating to eyes and respiratory system at breathing concentration less than 1 ppm.
|
Skin
|
Repeated or prolonged contact may cause defatting of the skin, leading to dermatitis.
|
Eyes
|
Mildly irritating.
|
Ingestion
|
Small quantities transferred from the hands to the mouth are not harmful. If swallowed, large quantities may cause nausea.
|
|
|
12.
|
ECOLOGICAL INFORMATION
Degradability
|
The organic components contained in the product are biodegradable, however they are not classified as readily biodegradable. Organic solvents may evaporate into the atmosphere, where they degrade.
|
Ecotoxicity
|
This product contains substances which may cause adverse effects in the aquatic environment. Do not empty this product into drains, the ground, watercourses or water supplies.
|
|
|
13.
|
DISPOSAL CONSIDERATIONS
Disposal considerations
|
Dispose of product and packaging waste in accordance with local regulations.
|
|
|
14.
|
TRANSPORT INFORMATION
Road (ADR)
|
UN-no.
Hazardous goods
Marg no.
|
Class:
free
|
Label
Hazard no.
|
Rail (RID)
|
UN-no.
|
Class:
free
|
Label
Hazard no.
|
Sea (IMDG)
|
UN-no.
Class:
free
|
Page
Label
|
Packing group:
|
IATA (air)
|
UN-no.
|
Class:
free
|
Label
|
Other transport information
|
Not classed as hazardous goods with regard to transport regulations.
|
|
|
15.
|
REGULATORY INFORMATION
R-phrases
|
|
N/A.
|
S-phases
|
S-24/25
|
Avoid contact with skin and eyes.
|
References
|
No ozone depleting chemicals are present or used in manufacture.
|
|
|
16.
|
OTHER INFORMATION
Sources of information
|
This material safety data sheet was prepared in compliance with Commission Directive 93/112/EC, 67/548/EEC and 88/379/EEC as well as their relevant amendments, on the approximation of laws, regulations and administrative provisions relative to the classification, packaging and labelling of dangerous substances and preparations.
|
General information
|
This information only applies to the product named above, and is not necessarily applicable if the product is used together with one or more other products or in another process. The information is correct and complete to the best of our knowledge and is provide in good faith but without guarantee. It is the responsibility of the user to ensure that the information is relevant and complete with regard to his/her use of this product.
|
Replaces
|
2000-08-18
|
Issued
|
2002-01-17
|
|
