PRE-RELEASE
Manifold absolute pressure sensor, induction manifold
| Manifold absolute pressure sensor, induction manifold |
| 1. |
Remove the engine cover.
|
|
| 2. |
Remove the wiring harness duct and remove the connector.
|
|
| 3. |
Remove the pressure sensor.
|
|
| To fit |
| 1. |
Clean the sealing surfaces and fit the pressure sensor.
Tightening torque 8 Nm (6 lbf ft). |
|
| 2. |
Refit the wiring harness duct and plug in the connector.
|
|
| 3. |
Fit the engine cover.
|
|
