Checking and adjustment, selector lever cable
|
|
Checking and adjustment, selector lever cable
|
|
1.
|
Check that the play in the selector lever is the same in position N as in position D. If it is not, adjust the cable as follows.
|
|
2.
|
Move the selector lever to position P (inside the car).
|
|
3.
|
Lift up the cable adjustment clasp.
|
|
4.
|
Move the selector lever to position P.
|
|
5.
|
Roll the car until the P interlock engages.
|
|
6.
|
Press the selector lever (in the car) backwards and press down the adjustment clasp so that it locks the cable ferrule.
|
Note
|
|
There is play in position P (inside the car). Press the selector lever backwards while pressing down the clasp.
|
|
|
7.
|
Make sure the play in position N and D is the same.
|
