PRE-RELEASE
SPORT button
| SPORT button |
| 1. |
Move the selector lever to position N or D.
|
|
| 2. |
Remove the front part of the selector lever casing.
|
|
| 3. |
Press up the SPORT button from below.
|
|
| 4. |
Unsolder the SPORT button. Place some form of protection under it so that drops of solder do not fall onto the centre console.
|
|
| To fit |
| 1. |
Solder the leads to the SPORT button. Place some form of protection under it so that drops of solder do not fall onto the centre console.
|
|
| 2. |
Press the SPORT button into place.
|
|
| 3. |
Run the leads in a loop so that they will not be nipped.
|
|
| 4. |
Fit the front part of the selector lever casing.
|
|
| 5. |
Screw the selector lever together.
|
|
