SAAB WIS ONLINE

PRE-RELEASE

Control module

Control module

Removing


1. Lower the soft top and position the soft top cover straight up.

2. Remove the side trim. See Removing .


3. Note the number of soft top cycles before changing the control module.

Important

ESD-SENSITIVE COMPONENT

Ground yourself by touching the car body or engine before unplugging or plugging in the component. Never touch the connector pins. Prior to changing a control module refer to Before changing a control module .


4. Remove the control module.

5. Unplug the connector.


Fitting



1. Plug in the connector.

Important

ESD-SENSITIVE COMPONENT

Ground yourself by touching the car body or engine before unplugging or plugging in the component. Never touch the connector pins. Prior to changing a control module refer to Before changing a control module .


2. Fit the control module and tighten the nuts.

3. Fit the side trim. See Fitting .

4. Connect the diagnostics tool and erase any diagnostic trouble code.

5. Run the soft top up and down a few times and check the function.


PRE-RELEASE