PRE-RELEASE
Soft top cover
| Soft top cover |
| Removing |
| 1. |
Remove the shell from the underside of the soft top cover.
|
|
| 2. |
Remove the screws that secure the collision cables to the soft top cover.
|
|
| 3. |
Mark the position for the screws securing the soft top cover latches.
|
|
| 4. |
Remove the screws and lift away the latches.
|
|
| 5. |
Remove the screws securing the access flaps. Loosen the flaps and turn them aside.
|
|
| 6. |
Mark the position for the soft top cover retaining nuts.
|
|
| 7. |
Remove the soft top cover retaining nuts and lift away the cover.
|
|
| Fitting |
| 1. |
Fit the soft top cover and tighten the retaining nuts according to the marking.
|
|
| 2. |
Fit the access flaps and tighten the screws.
|
|
| 3. |
Fit the latches and tighten down according to markings.
|
|
| 4. |
Fit the collision cables and tighten the screws. The end sleeves on each respective cable should point at each other.
Tightening torque: 14 Nm (10.3 lbf ft) |
|
| 5. |
Refit the shell.
|
|
