Windscreen frame sealing, CV
|
|
Windscreen frame sealing, CV
|
|
1.
|
Remove the plugs from the windscreen frame seal.
|
|
2.
|
Remove the bolts and remove the seal from the windscreen frame.
|
|
1.
|
Start to fit in both corners.
|
|
2.
|
Tighten down the seal.
|
|
4.
|
Pull off the protective backing from the double-sided adhesive tape and start to fit the seal at the bottom of the A-pillar and continue upwards to the corner.
|
|
5.
|
Continue fitting from the middle of the windscreen top edge and out towards the edges. Use soapy water to facilitate fitting.
|
|
6.
|
Check the fit against the front seal. Adjust the front seal if needed. See
|
