PRE-RELEASE
Soft top storage
| Soft top storage |
| Removing |
| 1. |
Open the boot lid.
|
|
| 2. |
Remove the clips and loosen the bolts, close the boot lid.
|
|
| 3. |
Remove the soft top. See
|
|
| 4. |
Remove the upper mountings for the seat belts.
|
|
| 5. |
Remove the front moulding and the two clips from the body.
|
|
| 6. |
Lift up the rear part of the outer window seal and remove the clip under the moulding.
|
|
| 7. |
Tap in the pins on the clips on the side protectors and pull out the clips.
|
|
| 8. |
Remove the soft top cover seal strip.
|
|
| 9. |
Remove the plastic clips.
|
|
| 10. |
Push out the cable leadthrough and lift up the velcro strip.
|
|
| 11. |
Unplug the connectors.
|
|
| 12. |
Lift out the soft top storage.
|
|
| Fitting |
| 1. |
Fit the soft top storage and plug in the connectors.
|
|
| 2. |
Insert the leadthrough and refit the velcro strip.
|
|
| 3. |
Fit the plastic clips.
|
|
| 4. |
Fit the soft top cover seal strip and fit the clips on the side protectors.
|
|
| 5. |
Lift up the rear part of the outer window seal and fit the clip under the moulding.
|
|
| 6. |
Fit the clip in the body and fit the front moulding.
|
|
| 7. |
Fit the seat belts.
|
|
| 8. |
Fit the soft top. See
|
|
| 9. |
Open the boot lid and tighten the bolts. Fit the clips.
|
|
