SAAB WIS ONLINE

PRE-RELEASE

30 02 599 Cleaning agent

30 02 599 Cleaning agent


Specifications

Loctite Super Clean 7063. 150 ml spray can.

Saab application

Cleaning agent for most materials to be glued with Loctite anaerobic products, such as thread locker, thread sealant and products for mounting bushings.

Packaging

1

Transport

The product is classified as dangerous goods when transporting. Special regulations apply to packaging, marking and transport, therefore existing lead times cannot be guaranteed.

Directives

The product is extremely flammable. Dehydrates the skin. May be hazardous if inhaled after frequent and repeated exposure. Pressurized can. Must not be exposed to direct sunlight or temperatures above +50 ° C. Must not be punctured or burned. Also applies to empty can. Do not spray toward open flame or glowing materials. Must be stored separately from materials which may ignite the product - Smoking is prohibited. Avoid inhalation of spray mist. Make sure ventilation is adequate.

Material safety data sheet


1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Product code

0178313

Product name

7063

Manufacturer - supplier

Loctite Sweden AB

Box 8823

SE-402 71 GÖTEBORG

Tel: +46 31 7505400

Fax: +46 31 7505391

Tel (emergencies): +353-1-4599301 / +353-87-2629625 / +353-1-4046444



2. COMPOSITION/INFORMATION ON INGREDIENTS

Product type

Solvent-based cleaner



Ingredient

CAS-no.

Conc.

R-phrases

Classification

Dimethoxymethane

109-87-5

10.00 - 30.00

R11

F

Aliphatic hydrocarbon solvent

64742-49-0

60.00 - 80.00

R11, R65, R51/53

Xn, F, N

Ethanol, denatured

64-17-5

10.00 - 30.00

R11

F



Key

FB/FH/FM = Hazard code for fire/health/environment

T+ = Very toxic

T = Toxic

C = Corrosive

Xn = Harmful

Xi = Irritant

V = Moderately harmful

IK = Not subject to labelling

E = Explosive

O = Oxidizing

F+ = Extremely flammable

F = Highly flammable

N = Dangerous for the environment



3. HAZARDS IDENTIFICATION

This product is highly flammable. Harmful: may cause lung damage if swallowed. The solvent defats the skin and may cause cracking and, in the event of repeated contact, eczema. Vapours may cause head aches and nausea.

4. FIRST AID MEASURES

Inhalation

Remove affected person to fresh air, and if still feeling unwell seek medical attention.

Skin

Wash skin with plenty of soap and water and apply replenishing cream.

Eyes

Flush eyes immediately with plenty of water for at least 15 minutes. Seek medical attention immediately.

Ingestion

Rinse mouth with water then give plenty of water to drink. Do not induce vomiting. Seek medical advice.



5. FIRE-FIGHTING MEASURES

Fire/Explosions risks

This product is highly flammable having a flash point of -21°C. Keep unaffected containers cool with water spray.

Suitable extinguishing media

If product is involved in fire extinguish with dry powder, foam or carbon dioxide.

Protective equipment

Self-contained breathing apparatus should be worn when dealing with fire.



6. SPILLAGE/ACCIDENTAL RELEASE MEASURES

Personal precautions

Ventilate area. Eliminate sources of ignition.

Methods for cleaning up

Confine the spillage with sand, earth or the like, and place in a closed container, which should be partially filled (air space), for disposal.



7. HANDLING AND STORAGE

Advice for safe handling

Use in well ventilated area. Keep away from sources of ignition - no smoking. Vapours should be extracted to avoid inhalation. Prolonged or repeated skin contact should be avoided.

Storage instructions

Keep away from sources of ignition. No smoking. Store away from heat in a cool, well-ventilated area.



8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Occupational exposure limits.

Chemical identity

Limit value (SE)

Ethanol, denatured

NGV 500ppm 8h TWA.

KTV 1000ppm (1900mg/m3) 15min



Skin protection

In case of repeated or prolonged skin contact, wear suitable gloves made of PVC, polyethene, natural rubber or similar ester-resistant material.

Other information

Use only in well-ventilated areas.



9. PHYSICAL AND CHEMICAL PROPERTIES

Form/state

Liquid

Odour

Hydrocarbon

Colour

Clear, Colourless

Flash Point (PMCC)

-21°C

Solubility in water

Insoluble

Solubility in acetone

Miscible

Density

0.735 kg/m³

Boiling point

87 to 104°C

Vapour pressure

Less than 1.75 bar at 50°C



10. STABILITY AND REACTIVITY

Stability

Relatively stable under recommended conditions of storage and handling.

Non-reactive with

Oxidizing agents, except for peroxides.



11. TOXICOLOGICAL INFORMATION

Inhalation

Inhalation of vapours may cause headaches or nausea.

Skin

Acute dermal LD50 (rabbit) is estimated to be >2000mg/kg. Solvent may remove essential oils from the skin making it susceptible to attack from other chemicals.

Eyes

May cause irritation to the eyes.

Ingestion

Small amounts of liquid aspirated into the respiratory system during ingestion or from vomiting may cause bronchopneumonia or pulmonary oedema. Ingestion of large quantities may cause liver or kidney damage.



12. ECOLOGICAL INFORMATION

Ecotoxicity

Does not contain any substances listed on the Montreal protocol.



13. DISPOSAL CONSIDERATIONS

Disposal considerations

Dispose of in accordance with local and national regulations. Evaporation and incineration recommended.



14. TRANSPORT INFORMATION

UN-no.

1993

Air (IATA)

Flammable liquid, n.o.s. Class 3, Pkg. Grp. II.

Sea (IMO)

Flammable liquid, Class 3.1, Pkg. Grp. II. EmS 3-07. MFAG 310.

Road/Rail (ADR/RID)

Flammable liquid, n.o.s., Class 3, Item no.2°(b), label no. 3.



15. REGULATORY INFORMATION

Contains

Naphtha

Hazard class

Highly flammable

Harmful



R-phrases

R11

Highly Flammable.

R65

Harmful: may cause lung damage if swallowed.

S-phases

S9

Keep container in a well-ventilated place.

S23

Do not breathe vapours.

S33

Take precautionary measures against static discharges.

S62

If swallowed do not induce vomiting: seek medical advice immediately and show this container or label.



16. OTHER INFORMATION

The information in this material safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the product(s) described herein. Attention of users is drawn to the possible hazards from improper use of the product(s).

Material safety data sheet revised

2000-01-31

For more information

Loctite Corporation, International Health and Regulatory Affairs, Tallaght Business Park, Whitestown, Dublin 24, Ireland.

Tel: +353-1-4046444

Fax: +353-1-4510806

Produced by

Dr. Sandra Wade Senior HRA Specialist Health & Regulatory Affairs - Europe




PRE-RELEASE