PRE-RELEASE

30 18 702 Primer

30 18 702 Primer

Specifications

Betaprime 5402. Red lid. 30 ml container.

Saab application

For adhesive kits Saab 30 05 600 and 30 05 618.

Packaging

1

Transport

The product is classified as dangerous goods when transporting. Special regulations apply to packaging, marking and transport, therefore existing lead times cannot be guaranteed.

Directives

The product is highly flammable and dangerous to personal health. Contains isocyanates. May cause allergic reaction if inhaled. Irritates eyes and respiratory organs. Can be dangerous if inhaled after prolonged and repeated exposure. Dehydrates the skin. Avoid inhaling vapours/mist. Avoid skin contact. Make sure that ventilation is adequate.

Material safety data sheet

1.	IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Trade name BETAPRIME 5402 Application Primer for plastic and paint. Supplier SAAB-ANA Konsult AB Box 1030 611 29 NYKÖPING Tel: +46 (0) 155-24 94 50

2.

COMPOSITION/INFORMATION ON INGREDIENTS Ingredient CAS-no. Content (%) Hazard symbol/R-phrases Butanone 78-93-3 >50 Xi, R11-20 Toluene 108-88-3 1-5 Xn, R11-20 Ethylacetate 141-78-6 5-10 V R320-313 MDI, isomer + homologues 9016-87-9 5-10 Xn, R20-36/37/38-42 Key FB/FH/FM = Hazard code for fire/health/environment T+ = Very toxic T = Toxic C = Corrosive Xn = Harmful Xi = Irritant V = Moderately harmful IK = Not subject to labelling E = Explosive O = Oxidizing F+ = Extremely flammable F = Highly flammable N = Dangerous for the environment

3.	HAZARDS IDENTIFICATION Flammability Highly flammable. Defats the skin. Harmful properties Irritating to eyes, respiratory system and skin. Can cause sensitization by inhalation. Contains isocyanates (MDI).

4.

FIRST AID MEASURES Inhalation Fresh air and rest. In case of breathing difficulties, seek medical advice immediately. Skin Wash with soap and plenty of water. Take off contaminated clothing. Eyes Rinse immediately with plenty of water (ideally running water) for several minutes. Seek medical advice if irritation persists. Ingestion Drink water. Seek medical advice.

5.

FIRE-FIGHTING MEASURES Suitable extinguishing media Foam, powder or carbon dioxide. Move or cool with water closed containers that are in the vicinity of the fire. Hazardous decomposition products Toxic products of combustion form, e.g. isocyanates. Refer to heading 10. Personal protection equipment in case of fire Use a respiratory mask with fresh air supply or firefighting suit when fighting the fire. Other information Move or cool with water closed containers that are in the vicinity of the fire.

6.

SPILLAGE/ACCIDENTAL RELEASE MEASURES Personal precautions Refer to sections 8 and 13 for personal protection equipment and disposal considerations. Precautions to avoid environmental damage Keep away from drains and water. Methods for cleaning up Confine the spillage or soak it up with a suitable absorbent material.

7.	HANDLING AND STORAGE Handling Avoid contact with eyes and skin. Make sure ventilation is adequate and do not breathe vapours. Storage Keep containers tightly closed in a cool, well-ventilated place at a temperature between +15 and +30°C.

8.

EXPOSURE CONTROLS/PERSONAL PROTECTION Respiratory equipment Method Limit Remarks Butanone NGV 150 mg/m 3 AFS 1996:2 Toluene NGV 200 mg/m 3 " Ethylacetate NGV 500 mg/m 3 " Respiratory equipment Use respiratory equipment with gas filter A (brown) + particle filter P2 if ventilation is inadequate. Eye protection Use eye/face protection if there is a risk of contact with the eyes. Skin protection: Avoid skin contact by wearing suitable protective gloves.

9.

PHYSICAL AND CHEMICAL PROPERTIES Form/state Liquid Odour Solvent Colour Black Solubility Insoluble in water (reacts) Density 900 kg/m³ Autoignition point 410 °C Flash point - 8 °C Solubility in water Insignificant Boiling point 77 °C Melting point - Explosion limit 0.8-11.5 % Vapour pressure 110 mBar Temp. 20 °C pH conc.

10.

STABILITY AND REACTIVITY Reacts with The product reacts violently with water, alcohols, amines and other oxidizing agents. Hazardous decomposition products If the product (even cured product) is exposed to high temperatures or fire, toxic decomposition products will form, such as isocyanates, nitrous oxides and carbon monoxide.

11.

TOXICOLOGICAL INFORMATION General If the product is heated by welding, grinding or the like, vapours/dust containing isocyanates can form. Inhalation Inhalation of these vapours/dust may cause sensitization and cause respiratory difficulties. Symptoms may occur even at low air concentrations and may not appear until several months after the exposure. Skin contact May cause mild irritation and there is a small risk of allergic eczema. Eyes Contact with the eyes may cause irritation and stinging. Ingestion Ingestion may cause nausea and vomiting.

12.	ECOLOGICAL INFORMATION Ecotoxicity No data on ecotoxicity presently available for this product.

13.	DISPOSAL CONSIDERATIONS Disposal considerations Collect spillage, waste products and spent absorbent material in a container. Mark the container with its contents and dispose of in accordance with national and local regulations.

14.	TRANSPORT INFORMATION Proper shipping name Paint-related material UN-no. 1993 Packaging group II ADR 3.3 (b) IMDG Class: 3.2 EmS-no.: 3-07 MFAG-no.: 340 DGR 3

15.

REGULATORY INFORMATION Labelling Harmful (Xn) Highly flammable (F) R-phrases R11 Highly flammable. R36 Irritating to eyes. R37 Irritating to respiratory system R38 Irritating to skin R42 May cause sensitisation by inhalation. S-phases S16 Keep away from sources of ignition - No smoking. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S38 In case of insufficient ventilation, wear suitable respiratory equipment. General information The product is classed and labelled in accordance with the regulations of the Swedish National Chemical Inspectorate and the Swedish National Inspectorate of Explosives and Flammables. Observe any local regulations regarding the substances contained in the product. The provisions of the Swedish National Board of Occupational Safety and Health on thermosetting plastics apply for handling.

16.

OTHER INFORMATION General information NOTE: Short best before date - first in, first out. The product is exempted from labelling with risk and safety phrases for flammable products due to the small size of the packaging. The product is also labelled: Contains isocyanates. Refer to manufacturer's information.

PRE-RELEASE

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.