PRE-RELEASE

30 32 356 Hydraulic oil

30 32 356 Hydraulic oil

Specifications

Esso Univis J26. 500 ml bottle.

Saab application

For soft top hydraulic system Saab 9-3 Convertible.

Packaging

1

Transport

No restrictions apply when transporting this product.

Directives

Prolonged or repeated skin contact may cause skin irritation. Avoid skin contact.

Material safety data sheet

1.	IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Trade name UNIVIS J26 Range of application Hydraulic oil Supplier SAAB-ANA Konsult AB Box 1030 611 29 NYKÖPING Tel: +46 (0) 155-24 94 50 Fax: +46 (0) 155-24 94 71

2.

COMPOSITION/INFORMATION ON INGREDIENTS Ingredient CAS-no. Content (%) R-phrases Solvent refined petroleum oil 60-100 EM Butylhydroxytoluene 128-37-0 0-1 XN, S22-43 Comments on composition Can contain further components that do not effect the classification of the product. Key FB/FH/FM = Hazard code for fire/health/environment T+ = Very toxic T = Toxic C = Corrosive Xn = Harmful Xi = Irritant V = Moderately harmful IK = Not subject to labelling E = Explosive O = Oxidizing F+ = Extremely flammable F = Highly flammable N = Dangerous for the environment

3.	HAZARDS IDENTIFICATION Health hazards Under normal conditions of use, this product is not considered hazardous. Prolonged or repeated exposure may cause skin irritation.

4.

FIRST AID MEASURES General Move the casualty from the source of exposure. If unconscious, place in the recover position and seek medical advice. If breathing has stopped, assist ventilation with a mechanical device or mouth-to-mouth resuscitation. If the casualty has no pulse, give cardiac massage. Inhalation Provide fresh air, warmth and rest. Administer oxygen if necessary. First aiders should have special training in administering oxygen. Seek medical advice if symptoms persist. Skin Take off contaminated clothing. Wash the skin with soap and water. Seek medical advice if irritation persists. Apply a rich skin cream to dry skin. Do not wash the skin with white spirit or other solvent. Eyes Rinse immediately with water for 20-30 minutes. Hold the eye wide open. Seek medical advice if symptoms persist. Ingestion Do not induce vomiting. Seek medical advice. Give 1-2 spoonfuls of cream or cooking/salad oil if the casualty is fully conscious. Do not give an unconscious person anything to drink. Medical information Treat symptomatically. Risk of chemically-induced pneumonia if aspirated during or after swallowing. If necessary, contact the poison information centre, tel. 112.

5.

FIRE-FIGHTING MEASURES Suitable extinguishing media Extinguish with powder, carbon dioxide or foam. Unsuitable extinguishing media Do not use water jet. Fire and explosion risks Can be ignited if heated to above its flash point. Small amounts of pollutant volatile hydrocarbons in used product can lower the flash point. The vapours are heavier than air and can reach distant sources of ignition via drains and the like. The product can accumulate static electricity which can cause ignition on discharge. Incomplete combustion produces toxic and highly flammable carbon monoxide. Incomplete combustion produces carbon dioxide, which forces aside air and oxygen. Other instructions Stop the leakage in a safe and controlled manner. Move and/or cool containers in the vicinity of the fire. Water for cooling heated surfaces and protecting personnel should only be used by trained firefighters. Rescue service personnel subjected to gas or fumes must wear breathing apparatus with fresh air supply and eye protection. Ring 112 for emergency services.

6.

SPILLAGE/ACCIDENTAL RELEASE MEASURES Precautions for avoiding personal injury Stop the leak. Remove any sources of ignition. Limit the dispersion. Warn personnel in the vicinity and keep unauthorized persons away. Environmental precautions Keep away from drains, sewers and watercourses. Methods for cleaning up Soak up with special absorbent material and leave at a central waste facility. Contact the emergency services in case of large spillages. Wipe up small spillages with absorbent paper or cotton waste and store as flammable waste until they can be safely disposed of. Other information Beware of slippery surfaces due to the product itself or its ability to dissolve asphalt, flooring and the like. Possible vapours are more dense than air and can, if the spillage is large, collect along the floor or ground.

7.

HANDLING AND STORAGE Special properties and risks The product can accumulate static electricity with can cause ignition on discharge. Can react with strong oxidizing agents. Possible vapours are more dense than air and can collect along the floor or ground. Vapours can spread via sewage systems and the like and reach even distance sources of ignition. Handling regulations Provide adequate ventilation when handling open packages. Keep away from sources of ignition. Use personal protection equipment, refer to section 8. Storage Keep away from sources of ignition. No smoking. Keep small containers closed when not in use. Ensure good ventilation. Hydrocarbons and their derivatives can attack certain synthetic materials, rubber and paints.

8.

EXPOSURE CONTROLS/PERSONAL PROTECTION Chemical name CAS-no. Limit Solvent refined petroleum oil - 1 mg/m 3 Control procedures Ensure adequate ventilation during work that produces gas, fumes or mist. Keep in original packaging. Avoid spillage. Avoid contact with eyes and skin. Do not used clothes that are soaked through by the product. Respiratory equipment Use respiratory equipment during work that produces gas, fumes, vapours or mist. Gas mask with combifilter A2/P2. Eye protection Wear eye protection if there is a danger of direct contact or splashes. Hand protection Wear protective gloves if there is a danger of direct contact or splashes. Recommended materials are natural rubber, neoprene, nitrile rubber and flourocarbon rubber. Skin protection Wear protective clothing if there is a danger of direct contact or splashes.

9.

PHYSICAL AND CHEMICAL PROPERTIES Form/state Liquid Odour Hydrocarbons Colour Red Density (15°C) 870 kg/m 3 Solubility in water Insoluble Solubility Soluble in organic solvents and mineral oils Explosion limits 0.6-6.5% Relative vapour density (air=1) >1 Boiling point 260 °C Flash point >97°C (COC) Viscosity (at 40°C) 29 cSt Rel. evap. rate Non-volatile

10.

STABILITY AND REACTIVITY Conditions to avoid Stable under normal conditions. Keep away from sources of ignition. Materials to avoid Strong oxidizing agents such as liquid chlorine and concentrated oxygen. Hazardous decomposition products Does not decompose at normal temperatures. Incomplete combustion produces toxic and highly flammable carbon monoxide. Incomplete combustion produces carbon dioxide, which forces aside air and oxygen.

11.

TOXICOLOGICAL INFORMATION General The product is of low toxicity if swallowed and in contact with skin. Inhalation High concentrations may cause mild irritation to the respiratory system. Skin Prolonged or repeated contact may cause defatting and drying of the skin and irritation. Eyes May cause mild irritation to the eyes. Ingestion Small quantities of fluid that are aspirated into the lungs if swallowed or during vomiting may cause serious lung damage.

12.	ECOLOGICAL INFORMATION Other information No special environmental data is available for the product as such.

13.	DISPOSAL CONSIDERATIONS Disposal considerations Do not throw waste or empty packaging into the environment. Dispose of in accordance with local regulations. Waste group Waste group 1 - Waste oil

14.	TRANSPORT INFORMATION Transport name Not hazardous goods.

15.

REGULATORY INFORMATION Classification No subject to labelling. Content Solvent refined petroleum oil, butylhydroxytoluene (BHT) R-phrases None S-phases S2 Keep out of the reach of children. S23.5 Do not breathe vapours/spray S24 Avoid contact with skin. S27 Take off immediately all contaminated clothing. S62 If swallowed do not induce vomiting: seek medical advice immediately and show this container or label.

16.	OTHER INFORMATION Issued by Inger Eriksson Replaces 1993-12-01 Issued 1998-03-16

PRE-RELEASE

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.