Engine mounting, front B204i/E
|
|
Engine mounting, front B204i/E
|
|
1.
|
Raise the car and remove the front wheel on the side of the car on which the engine mounting pad is to be replaced.
|
|
2.
|
Remove the wheel arch liner and air shield and place a jack under the engine or gearbox.
|
|
3.
|
Unscrew the bolts holding the mounting pad to the body.
|
|
4.
|
Lower the engine slightly and remove the mounting pad from its bracket.
|
|
1.
|
Fit the mounting pad to its bracket.
Tightening torque: 39 Nm (29 lbf ft)
|
|
2.
|
Raise the engine and tighten the mounting pad on the body. Remove the jack.
Tightening torque: 73 Nm (54 lbf ft)
|
|
3.
|
Fit the air shield and wheel arch liner.
|
|
4.
|
Fit the wheel and tighten the bolts.
Tightening torque: 120 Nm (89 lbf ft)
|
|
5.
|
Lower the car to the floor.
|
