Engine mounting, front right B235R, B205L/R
|
|
Engine mounting, front right B235R, B205L/R
|
|
1.
|
Place
Lifting beam
83 94 850 above the engine and put the hook in the front lifting eye. Take up the weight of the engine.
|
|
2.
|
Lift the car and remove the bottom engine cover. (RH section only on B205L/R). Remove the resonator and the air shield behind it.
|
|
3.
|
Loosen the clip securing the wheel arch liner to the structural member
|
|
4.
|
Undo the bolts holding the mounting pad to the body. Lower the car.
|
|
5.
|
Lower the engine slightly with the lifting beam and raise the car.
|
|
6.
|
Undo the centre bolt securing the engine mounting pad to the bracket (8 mm socket) and remove the mounting pad.
|
|
1.
|
Fit the mounting pad to the bracket
Tightening torque: 39 Nm (29 lbf ft)
|
|
2.
|
Lower the car and raise the engine slightly with the lifting sling.
|
|
3.
|
Raise the car and tighten the mounting pad to the body
Tightening torque 73 Nm (54 lbf ft)
|
|
4.
|
Fit the clip on the wheel arch liner.
|
|
5.
|
Fit the air shield and resonator.
|
|
6.
|
Fit the bottom engine cover and lower the car.
|
|
7.
|
Take up the weight of the motor and remove the lifting sling.
|
