Bleeding the hydraulic clutch system in the car
|
|
Bleeding the hydraulic clutch system in the car
|
For bleeding the slave cylinder, see
Bleeding the slave cylinder
|
1.
|
Unscrew the cap on the brake fluid reservoir.
|
|
2.
|
Top up with brake fluid if necessary.
|
|
3.
|
Open the bleeder nipple.
|
|
5.
|
Apply compressed air to the bleeder tool and bleed the clutch until fluid appears at the nipple.
|
|
6.
|
Tighten the bleed nipple and remove the bleeding tool.
|
|
8.
|
Hold the brake bleeder hose against the nipple and bleed the reservoir for about 1 min or as long as air bubbles rise to the surface.
|
|
9.
|
Check the function of the clutch and top up with brake fluid to the correct level.
|
|
10.
|
Refit all components.
|
