30 04 520 Anti-corrosion agent
|
|
30 04 520 Anti-corrosion agent
|
Kontakt 61. special agent for corrosion protection on new contacts and electromechanical drive mechanisms. Removes dirt, resin, oil, metallic residue. Long-term protection against corrosion. Highly effective lubricant of precision-manufactured drive mechanisms. 200 ml spray can.
Connectors, electrical connections (not on oxygen sensor).
1
The product is classified as dangerous goods when transporting. Special regulations apply to packaging, marking and transport, therefore existing lead times cannot be guaranteed.
The product is highly flammable. Harmful if inhaled. Irritates eyes. Dehydrates skin. Pressurized can. Must not be exposed to direct sunlight or temperatures above +50
°
C. Must not be punctured or burned. Also applies to empty can. Do not spray toward open flame or glowing materials. Must be stored separately from materials which may ignite the product - Smoking is prohibited. Avoid inhalation of spray mist. Avoid skin and eye contact. Make sure that ventilation is adequate.
|
Material safety data sheet
|
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product name
|
KC Kontact 61 AE
|
Manufacturer - supplier
|
CRC Industries Europe N.V./S.A.
Touwlagerstraat 1
B-9240 ZELE / BELGIUM
Tel: +32 52 45 60 11
Fax: +32 52 45 00 34
|
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient
|
CAS-no.
|
Weight (%)
|
Symbol
|
R-phrases
|
2-butanol
|
78-92-2
|
10-30
|
Xn
|
10-20
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
|
3.
|
HAZARDS IDENTIFICATION
Health and fire hazards
|
Highly flammable.
|
|
|
4.
|
FIRST AID MEASURES
General information
|
If symptoms persist, always seek medical advice.
|
Inhalation
|
Move the casualty into fresh air.
|
Skin
|
Wash with soap and water.
|
Eyes
|
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes
|
Ingestion
|
If swallowed do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention.
|
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Water, foam, carbon dioxide or dry agent.
|
Fire-fighting procedures
|
Keep container(s) exposed to fire cool, by spraying with water.
|
Other risks
|
Aerosols may explode if heated above 50°C.
|
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Shut off all ignition sources. Ensure adequate ventilation.
|
Environmental precautions
|
Do not allow to enter public sewers and watercourses.
|
Methods for cleaning up
|
Absorb spillage in suitable inert material.
|
|
|
7.
|
HANDLING AND STORAGE
Handling
|
Use only in well-ventilated areas, especially if confined. Keep away from heat and sources of ignition.
|
Storage
|
Do not expose to temperatures exceeding 50°C.
|
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Substance
|
CAS-no.
|
Method
|
Volume
|
Isopropanol
|
67-63-0
|
MAK
|
400 ppm
|
Isohexane (n-hexane <5%)
|
64742-49-0
|
MAK
|
200 ppm
|
2-butanol
|
78-92-2
|
TLV
|
100 ppm
|
Control procedures
|
Use only in well-ventilated areas. Keep away from heat and sources of ignition.
|
Respiratory equipment
|
Ensure good ventilation for prolonged use in confined areas.
|
Eye protection
|
Wear eye protection if there is a danger of splashes.
|
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Liquid
|
Odour
|
Solvent
|
Colour
|
Blue
|
Melting point range
|
<-20 °C
|
Boiling point range
|
58-100 °C
|
Relative density
|
0.76 (at 20°C, water=1)
|
Vapour pressure
|
20 kPa (at 20°C)
|
Flash point
|
<0 °C
|
Autoignition point
|
<200 °C
|
|
|
|
|
10.
|
STABILITY AND REACTIVITY
Conditions to avoid
|
Do not expose to temperatures exceeding 50°C.
|
Materials to avoid
|
Strong oxidizing agent.
|
Hazardous decomposition products
|
CO, CO
2
|
|
|
11.
|
TOXICOLOGICAL INFORMATION
Substance
|
CAS-no.
|
Method
|
Volume
|
Isopropanol
|
67-63-0
|
LD50 oral (rat)
|
5045 mg/kg
|
Isohexane (n-hexane <5%)
|
64742-49-0
|
LD50 oral (rat)
|
>2000 mg/kg
|
2-butanol
|
78-92-2
|
LD50 oral (rat)
|
6480 mg/kg
|
Inhalation
|
Inhalation of solvent vapours may give rise to nausea, headaches and dizziness.
|
Skin
|
Prolonged skin contact may defat the skin, which may give rise to irritation, and in some cases dermatitis.
|
|
|
12.
|
ECOLOGICAL INFORMATION
Other effects
|
ODP (ozone depletion potential). No experiment data available.
|
|
|
13.
|
DISPOSAL CONSIDERATIONS
Disposal considerations
|
Do not empty into drains (S29). Dispose in accordance with local, state or national legislation.
|
|
|
14.
|
TRANSPORT INFORMATION
UN-no.
|
1950
|
Road/Rail - ADR/RID
|
2.10.b.2
|
|
|
15.
|
REGULATORY INFORMATION
Hazard symbols
|
Highly flammable(F).
|
R-phrases
|
R11
|
Highly flammable.
|
S-phases
|
S2
|
Keep out of the reach of children.
|
|
|
S16
|
Keep away from sources of ignition - No smoking.
|
|
|
S23
|
Do not breathe vapour/fumes/spray/mist.
|
|
|
S51
|
Use only in well-ventilated areas.
|
Other information
|
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material.
|
|
|
16.
|
OTHER INFORMATION
General information
|
This product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with any legal regulation. The information contained herewith is based on the present state of our knowledge and is intended to describe our products from the point of view of safety requirements. It does not guarantee any specific properties.
|
Issued
|
1995 -08-10
|
|
